0
0

EGW 5.56x45mm NATO 7-Hole Cartridge Checker Case Gauge

UPC: 841370107735

$27.00

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you load your own 5.56 or run a lot of mixed factory ammo, this little block of aluminum earns its spot on your bench fast. The EGW 7-Hole Cartridge Checker gives you seven stations to drop rounds into, letting you batch-check cartridges instead of fiddling with one at a time. A round that seats flush and drops free is good to go. One that sits proud or binds up is telling you something is off before it causes a problem at the range.

What Sets the EGW 5.56 Cartridge Checker Apart

Most of the difference comes down to how the holes are cut. Rather than running a boring bar, EGW uses the actual Clymer reamers that are used to cut rifle chambers, so the gauge mirrors a real chamber closely. The gauges are cut to SAAMI minimum spec, which means anything that passes here should chamber in just about any correctly cut barrel. It measures minimum case diameter and maximum overall length, the two things most likely to trip up feeding and chambering.

Built to Live on the Reloading Bench

The body is machined from solid 6061 T6 aircraft grade aluminum and finished in a matte black anodized coating, so it shrugs off the usual bumps and handling that come with bench life. It measures right around 3 inches long, 1.25 inches wide, and 2.26 inches tall, so it is compact enough to toss in a range bag or keep next to your press. It is made in the USA.

Worth noting if you are deciding between this and the .223 Remington version: the 5.56 gauge has a longer throat, while the bullet still seats to the same depth. For checking true 5.56x45mm NATO ammo, this is the one you want. Drop your rounds in, check the fit, and head out knowing your ammo is dialed in.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 70160
  • UPC: 841370107735
  • Caliber: 5.56x45mm NATO
  • Number of Holes: 7
  • Material: 6061 T6 Aircraft Grade Aluminum
  • Finish: Matte Black Anodized
  • Length: 3 in
  • Width: 1.25 in
  • Height: 2.26 in
  • Chamber Cut: Clymer Reamers, SAAMI Minimum Spec
  • Measures: Minimum Case Diameter and Maximum Overall Length
  • Country of Origin: Made in USA

What’s Included

  • EGW 5.56x45mm NATO 7-Hole Cartridge Checker

Frequently Asked Questions

What does the EGW 5.56 cartridge checker actually measure?

It checks two of the most important dimensions for reliable feeding and chambering: minimum case diameter and maximum overall length. If a round drops in flush and falls back out freely, it is within spec. If it sits high or binds, the case is likely too fat, too long, or improperly sized.

Can I use this checker for .223 Remington ammo too?

This gauge is cut specifically for 5.56x45mm NATO, which has a longer throat than the .223 version. The bullet seats to the same depth in both, but if you shoot a lot of true .223 Remington, EGW offers a dedicated .223 checker. For checking 5.56 NATO loads, this is the correct gauge.

What makes EGW chamber checkers different from cheaper gauges?

Rather than cutting the holes with a boring bar, EGW uses the same Clymer reamers that are used to cut actual rifle chambers. The gauges are also held to SAAMI minimum spec, so ammo that passes should chamber in just about any correctly cut barrel. It is machined from 6061 T6 aluminum and made in the USA.

Is the 7-hole checker good for reloaders or factory ammo?

Both. Reloaders use it to verify resized brass and finished rounds before loading magazines, and plenty of folks run factory ammo through it before a match or a long range day. The seven stations let you batch-check rounds quickly instead of doing them one at a time.

Additional information

UPC

841370107735

Manufacturer

Manufacturer Part Number

70160

Reviews

There are no reviews yet.

Be the first to review “EGW 5.56x45mm NATO 7-Hole Cartridge Checker Case Gauge”