Description
If you're loading up a big batch of .45 ACP and want to catch problem rounds before they ever hit the range, this is the kind of tool that earns its keep fast. The EGW 7-Hole Cartridge Checker lets you drop in seven rounds at a time, so instead of fussing with calipers one case at a time you get a quick pass/fail on a whole handful of ammo in seconds.
What sets EGW apart is how these gauges are made. The .45 ACP checker is machined from solid 6061 T6 aircraft-grade aluminum with an anodized matte black finish, and rather than using a boring bar to cut the holes, EGW uses the same Clymer reamers that chamber actual barrels. That means the gauge mirrors a real minimum SAAMI-spec chamber, so if a round falls flush and drops back out under its own weight, you've got a very good idea it'll feed and chamber in your 1911 or whatever .45 you're running.
How the .45 ACP 7-Hole Checker Works
Using it is about as simple as reloading tools get. Drop a resized case or a finished round into one of the holes. If it sits flush or just below the top surface, you're in good shape on case length and diameter. If it stands proud, that case may need trimming or the round may need a deeper bullet seat. Flip the gauge over and the bullet tip shouldn't poke past the bottom, which is your quick seating-depth check. A properly made round will fall out by gravity alone.
Why Reloaders Keep This Gauge on the Bench
Folks who run these consistently point to the solid build and how much faster it is than checking rounds by hand. It's great for catching slightly oversized brass, high primers, or seating issues that cause feeding hiccups and stuck cases down the line. Whether you're verifying your own reloads or spot-checking factory ammo before a match, it's a small piece of gear that saves you headaches at the worst possible moment. Compact enough to live on the bench or ride in the range bag, it's one of those buy-it-once tools that just works.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 70140
- UPC: 841370107698
- Caliber: .45 ACP
- Capacity: 7 Holes
- Material: 6061 T6 Aircraft-Grade Aluminum
- Finish: Matte Black Anodized
- Chamber Cut: Clymer Reamer, SAAMI Minimum Spec
- Length: 3 in
- Width: 1.25 in
- Height: 1.275 in
- Measures: Minimum Case Diameter and Maximum Overall Length
What’s Included
- EGW .45 ACP 7-Hole Cartridge Checker (case gauge)
Frequently Asked Questions
How do I use the .45 ACP 7-Hole Cartridge Checker?
Drop a resized case or finished round into any of the seven holes. If it sits flush with or just below the top surface, the case length and diameter are within spec. Flip the gauge over to confirm the bullet tip doesn't protrude past the bottom, and a good round will fall right back out under its own weight.
Can I use this gauge on factory ammo or only on reloads?
It works great for both. Plenty of reloaders check their handloads with it, but it's also handy for spot-checking factory ammo before a match or competition so you don't get a surprise stuck case at the line. Anything that fails the gauge gets pulled before it ever makes it into a magazine.
What makes the EGW checker different from other case gauges?
EGW cuts these gauges with the actual Clymer reamers used to chamber barrels, rather than a boring bar, and they're held to SAAMI minimum spec. That means the gauge closely mirrors a real chamber, so if a round passes here it's very likely to feed and chamber cleanly in your pistol.
Why does it have seven holes?
The seven-hole design lets you check a whole handful of .45 ACP rounds at once instead of one at a time. It's a big time-saver over using a caliper on every case and makes it easy to run through a large batch of loaded ammo quickly.





Reviews
There are no reviews yet.