Description
If you load or shoot .38 Super, this little block of aluminum earns its place on the bench fast. The EGW .38 Super 7-Hole Cartridge Checker gives you seven pockets to drop finished rounds or resized brass into, so you can confirm your ammo falls within spec before it ever gets near the chamber. It's a simple tool that quietly prevents the headaches reloaders know all too well: jams, failures to feed, and rounds that stick when you least want them to.
What Sets the EGW 7-Hole Checker Apart
EGW machines these gauges from solid 6061 T6 aircraft grade aluminum and finishes them in matte black anodizing to hold up to years of bench use. The detail most people appreciate is how the holes are cut. Instead of boring bars, EGW uses actual Clymer reamers, the same ones used to chamber barrels, and cuts to SAAMI minimum spec. That means if a round drops cleanly into the gauge, you have real confidence it'll run in your pistol.
Checking .38 Super Brass and Loaded Rounds
The gauge measures both minimum case diameter and maximum overall length, which covers the two things that trip up auto pistol ammo most. Auto cartridges headspace on the case mouth, so after you resize and deprime, drop the case in. If it sits flush with the top, you're good to go. If it protrudes, it may need trimming. The same flush check works for verifying bullet seating depth on finished rounds, and you can flip the gauge over to make sure the bullet tip isn't sitting too far out. Running seven at a time makes quick work of a full batch. Worth noting: this is a dedicated .38 Super gauge, and .38 Super Comp works in it too, but it will not check .38 Special.
Reloaders consistently call tools like this nearly essential, praising the sturdy build and how much faster it is than fussing with hand calipers on every round. Factory ammo shooters get use out of it too, since dropping a few rounds in before a match or a hunt tells you whether your box is going to run clean.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 70120
- UPC: 841370107629
- Cartridge: .38 Super (also accepts .38 Super Comp)
- Number of Holes: 7
- Material: 6061 T6 Aircraft Grade Aluminum
- Finish: Matte Black Anodized
- Machined With: Clymer Reamers
- Spec: SAAMI Minimum
- Measures: Minimum case diameter and maximum overall length
- Length: 3 in
- Width: 1.25 in
- Height: 1.28 in
- Made In: USA
What’s Included
- EGW .38 Super 7-Hole Cartridge Checker
Frequently Asked Questions
Will the EGW 7-hole checker work for both reloaded and factory .38 Super ammo?
Yes. It's built to verify resized brass and finished reloads, and it works just as well for spot-checking factory loaded ammunition before you head to the range. Dropping a few rounds in before a match or competition is a quick way to confirm everything will chamber.
Does this gauge also accept .38 Super Comp?
It does. The gauge is cut for .38 Super and .38 Super Comp drops right in as well. Keep in mind it is not a .38 Special gauge, so those rounds won't check in it.
How is the EGW cartridge checker made and why does it matter?
It's machined from solid 6061 T6 aircraft grade aluminum and cut with actual Clymer reamers, the same tooling used to chamber real barrels, to SAAMI minimum spec. That approach means the gauge closely mirrors an actual chamber, so a round that fits the gauge should run in your pistol. The matte black anodized finish keeps it looking and working right through years of bench use.
What exactly does the gauge check on each round?
It measures minimum case diameter and maximum overall length, the two dimensions most likely to cause feeding problems in auto pistols. Since .38 Super headspaces on the case mouth, a round sitting flush with the gauge tells you the case length and seating depth are in spec. Flip it over to confirm the bullet tip isn't protruding past the bottom.





Reviews
There are no reviews yet.