0
0

EGW T/C Venture & Compass Long Action 1-Piece Picatinny Base 0 MOA

UPC: 841370106752

$35.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

EGW built this 1-piece Picatinny base specifically for the Thompson Center Venture and Compass long action rifles, and it solves one of the most common headaches these guns bring to the table: limited optic mounting options. Instead of being stuck with proprietary bases or a short rail section, you get full-length Picatinny cross slots that let you dial in eye relief and ring placement however your setup demands. It drills right into the factory scope mount holes on the receiver, so there's no gunsmithing or tapping needed to get it on.

What Sets the T/C Venture & Compass Picatinny Base Apart

This is a 0 MOA base, which is the right call if you're shooting inside roughly 500 yards, whether that's chasing deer, working coyotes, or just punching paper at the range. The rail is machined from domestic 6061 T6 extruded aluminum and finished in matte black anodizing, so it holds up to weather and recoil without complaint. A milled center channel trims the weight down to around 2 ounces, and in a lot of cases it leaves your factory iron sights usable underneath.

Fit and Mounting Notes for the Venture & Compass Base

The full-width cross slots are cut to MIL-STD 1913 specs, so it plays nice with both Picatinny and Weaver style rings. Center spread runs about 3.75 inches with an overall length of 7.366 inches and a height of roughly 0.4 inches from the top of the receiver to the top of the rail. It fits the Venture long action cleanly, and it works on the Compass long action too, though the rail may overhang slightly at the rear on the Compass. Before you order, it's worth measuring the hole spacing on your receiver to confirm it matches up.

Mounting hardware comes in the box, and EGW backs these mounts with a reputation for being the straightforward, made-in-the-USA choice for hunters and anyone who wants a dependable optic platform without the guesswork.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 46910
  • UPC: 841370106752
  • Fits: Thompson Center Venture & Compass Long Action
  • Rail Type: One-Piece Picatinny
  • Elevation / Cant: 0 MOA
  • Material: 6061 T6 Extruded Aluminum
  • Finish: Matte Black Anodized
  • Overall Length: 7.366 in
  • Center Spread: 3.75 in
  • Height: 0.4 in (receiver top to rail top)
  • Weight: 2 oz
  • Ambidextrous: Yes
  • Ring Compatibility: Picatinny or Weaver
  • Torque Spec: 20 in/lbs
  • Color: Black

What’s Included

  • One-piece Picatinny scope base
  • #6-48 x 1/4 mounting screws
  • T-10 Torx bit

Frequently Asked Questions

Which rifles does this EGW Picatinny base fit?

It's designed for the Thompson Center Venture long action and the Thompson Center Compass long action. The fit on the Venture is clean, and on the Compass it works as well, though the rail may overhang slightly at the rear. It's smart to measure the hole spacing on your receiver first to make sure everything lines up.

Do I need to drill or tap my receiver to install it?

No. The base is drilled to line up with the factory scope mount holes already on your receiver, so it bolts right on with the included hardware. No gunsmithing or tapping required to get your optic up and running.

What does the 0 MOA rating mean for my setup?

A 0 MOA base has no built-in forward cant, which is ideal for shooting out to roughly 500 yards. If you're hunting, working predators, or shooting at typical range distances, 0 MOA gives you plenty of elevation adjustment within your scope. For extended long-range work past 500 yards, a 20 MOA base is the better pick.

Can I use standard scope rings with this base?

Yes. The full-width cross slots are cut to MIL-STD 1913 specs, so it accepts both Picatinny and Weaver style rings. That gives you plenty of flexibility in ring choice and lets you slide your optic around to get eye relief dialed in.

Additional information

UPC

841370106752

Manufacturer

Manufacturer Part Number

46910

Color

Black

Model

Style

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “EGW T/C Venture & Compass Long Action 1-Piece Picatinny Base 0 MOA”