0
0

EGW CVA Inline/Accura Muzzleloader 0 MOA Picatinny Scope Rail

UPC: 841370106615

$26.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Getting a good scope dialed in on a muzzleloader starts with a mounting base you can trust, and that's exactly what this EGW rail delivers. It's a one-piece Picatinny base built specifically for CVA Inline and Accura muzzleloaders, drilled to line up with the factory scope mount holes on the receiver so there's no guesswork once you have the right model in hand.

Built for the CVA Inline and Accura Muzzleloader

This base fits CVA Inline Muzzleloaders and CVA Accura Muzzleloaders with a center spread of 2.361 inches between the two middle receiver holes. That measurement matters, so it's worth checking your receiver before mounting. If your second-to-third hole distance comes in closer to .787 inches, that points toward a different EGW model instead. Taking a minute to measure saves you a headache down the line and guarantees a tight, confident fit.

Why This EGW Picatinny Rail Holds Up

The rail is machined from domestic 6061 T6 extruded aluminum and finished in matte black anodizing, so it shrugs off weather and years of hunting season without looking tired. Cross slots run the full length of the rail, which gives you real flexibility when positioning scope rings and setting eye relief. The milled center channel trims weight, and in a lot of setups it leaves room to still use your factory iron sights. It accepts both Picatinny and Weaver rings, so you're not locked into one ring system.

Mounting the CVA Muzzleloader Scope Base

Setup is straightforward. The base ships with the mounting screws and a Torx bit, and EGW recommends torquing to 20 inch-pounds with a drop of blue Loctite to keep everything locked in under recoil. It's a 0 MOA base, meaning it sits flat with no built-in elevation cant, which is a solid choice for the typical ranges most folks hunt with a muzzleloader. The whole thing weighs right around 2 ounces, so you're adding a stable optic platform without bulking up the rifle.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • MPN: 46600
  • UPC: 841370106615
  • Fits: CVA Inline Muzzleloader and CVA Accura Muzzleloader
  • Rail Type: One-Piece Picatinny
  • Elevation: 0 MOA
  • Material: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black Anodized
  • Center Spread: 2.361 inches
  • Height: 0.4 inch (receiver top to Picatinny top)
  • Weight: Approximately 2 oz
  • Ring Compatibility: Picatinny or Weaver
  • Torque Spec: 20 in-lbs
  • Made In: USA
  • Color: Black

What’s Included

  • One-piece Picatinny scope base
  • Mounting screws
  • Torx bit

Frequently Asked Questions

Which CVA models does this EGW muzzleloader base fit?

This rail is made for CVA Inline Muzzleloaders and CVA Accura Muzzleloaders. The best way to confirm fitment is to measure the hole spacing on your receiver, since the center spread on this base is 2.361 inches between the two middle holes. If your second-to-third hole distance measures around .787 inches, you'll want a different EGW model instead.

What does 0 MOA mean on this CVA scope rail?

A 0 MOA base sits flat with no built-in elevation cant, so your scope starts level with the bore. That's a good match for the ranges most hunters shoot with a muzzleloader. If you were stretching out to long distance you might want a canted rail, but for typical muzzleloader use the 0 MOA keeps things simple.

Do I need to drill or tap my receiver to install this base?

No. The base is drilled to line up with the factory scope mount holes on compatible CVA receivers, so you just bolt it on. EGW recommends torquing the screws to 20 inch-pounds with a drop of blue Loctite to keep it secure under recoil.

What rings work with this EGW Picatinny rail?

The top is cut to Picatinny standard with cross slots running the full length of the rail. That means it accepts both Picatinny and Weaver scope rings, so you've got flexibility on ring choice and on positioning your scope for proper eye relief. Rings are not included, so you'll want to grab a set that matches your scope tube diameter.

Additional information

UPC

841370106615

Manufacturer

Manufacturer Part Number

46600

Color

Black

Style

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “EGW CVA Inline/Accura Muzzleloader 0 MOA Picatinny Scope Rail”