0
0

EGW Mossberg 100 ATR / 4×4 Long Action Picatinny Rail 0 MOA

UPC: 841370106363

$36.00

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Getting your glass mounted right starts with a base you can trust, and this EGW Picatinny rail gives your Mossberg 100 ATR or 4×4 long action a one-piece foundation that stays put. It's machined from domestic 6061 T6 extruded aluminum and finished in a matte black Type II anodizing, so it shrugs off the weather and the knocks that come with a hunting season. The full-length Picatinny slots let you slide your rings fore and aft, which means you can nail down proper eye relief without fighting your scope. It accepts Picatinny or Weaver style rings, so you're not locked into one ring system.

What the EGW Mossberg 100 ATR Rail Brings to the Bench

This is a true 0 MOA base, which is the right call for general hunting and target work inside roughly 500 yards. Because there's no built-in cant, you keep your scope's full adjustment range centered, which makes zeroing straightforward. The rail measures 7.458 inches overall with a 4.7 inch center spread, sits about .575 inches from the top of the receiver to the top of the Picatinny, and tips the scale at a featherweight 2 ounces. There's a milled center channel that trims weight without giving up rigidity.

Fit and Install Notes for the 100 ATR / 4×4 Long Action

The base drops onto the factory scope mount holes, so there's no drilling or tapping required. It comes with #6-48 x 1/4 inch Torx screws and a T-10 bit to get you going. EGW recommends torquing the screws to 20 inch pounds with a drop of blue threadlocker so nothing walks loose under recoil. The design is beveled on both sides, making it ambidextrous and clean looking from either direction. As always, it's worth measuring your receiver hole spacing against the published 4.7 inch center spread to confirm the match before you wrench it down.

For anyone who struggled to find a proper rail for the 100 ATR, this one solves that problem and gives you a rock-solid platform to build on.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • MPN: 45500
  • UPC: 841370106363
  • Model: 100 ATR / 4×4 Long Action
  • Fits: Mossberg 100 ATR Long Action, Mossberg 4×4 Long Action
  • Rail Type: One-Piece Picatinny
  • MOA / Cant: 0 MOA
  • Material: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black Type II Anodizing
  • Overall Length: 7.458 in
  • Center Spread: 4.7 in
  • Height: .575 in (top of receiver to top of Picatinny)
  • Weight: 2 oz
  • Ambidextrous: Yes
  • Ring Compatibility: Picatinny or Weaver style rings
  • Recommended Torque: 20 in/lbs

What’s Included

  • One-piece Picatinny scope base
  • #6-48 x 1/4 inch Torx mounting screws
  • T-10 Torx bit

Frequently Asked Questions

What does the EGW 45500 rail fit?

This base is built for the Mossberg 100 ATR Long Action and the Mossberg 4×4 Long Action. It drops onto the factory scope mount holes on the receiver, so there's no drilling or tapping needed. Before installing, it's smart to measure your receiver's hole spacing against the published 4.7 inch center spread to confirm the fit.

Is this a 0 MOA or 20 MOA rail?

This is a 0 MOA base with no built-in cant. That's the right setup for general hunting and target shooting out to around 500 yards, since it keeps your scope's adjustment range centered. If you're reaching way out past that, a 20 MOA base would be the better pick, but for most 100 ATR setups the 0 MOA does the job.

What rings work with this Picatinny rail?

The rail accepts both Picatinny and Weaver style scope rings, so you've got flexibility in what you mount. The slots run the full length, which lets you shift your rings forward or back to dial in proper eye relief. That makes it easy to pair with just about any scope you'd run on a 100 ATR.

Does the rail come with mounting hardware?

Yes, it ships with #6-48 x 1/4 inch Torx screws and a T-10 bit, so you have what you need to get it mounted. EGW recommends torquing the screws to 20 inch pounds and adding a drop of blue threadlocker to keep everything from loosening under recoil. Give the threadlocker time to cure before heading to the range.

Additional information

UPC

841370106363

Manufacturer

Manufacturer Part Number

45500

Color

Black

Length

8.4500

Model

Style

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “EGW Mossberg 100 ATR / 4×4 Long Action Picatinny Rail 0 MOA”