Description
If you've been fighting with two-piece bases that never quite line up, this EGW rail is the fix. It's a single-piece Picatinny mount built specifically for post-1997 Mossberg 500, 590, 835, 930, and 935 shotguns, and it bolts right onto the factory scope mount holes already drilled into your receiver. No gunsmithing, no sending the gun out, just a screwdriver and a few minutes of your time.
EGW machines this rail from domestic 6061 T6 extruded aluminum and finishes it in a matte black anodized coating that holds up to field use and recoil. The cross slots run the full length of the rail and are spaced to standard Picatinny dimensions, which means you get real flexibility in where you set your rings for proper eye relief. It takes both Picatinny and Weaver style rings, so you're not locked into one brand of optic.
Why the EGW Mossberg Rail Is Worth Running
The milled channel down the center keeps this thing light, right around 2 ounces, so you're not adding noticeable weight up top. In a lot of setups it sits low enough that it won't block your factory iron sights either, which is handy if you want to keep a backup sighting option. Whether you're setting up a deer slug gun, a turkey rig, or a home-defense build with a red dot, this rail gives you a solid, repeatable platform to mount on.
Getting the EGW Rail Mounted Right
Installation is straightforward. Pull any plugs the factory left in the receiver holes, set the rail down, add a drip of blue thread locker, and snug the screws down to around 20 inch-pounds. EGW includes both #6-48 and #8-40 screws in the box plus a T-10 bit, so no matter which year or model Mossberg you're working with, you'll have the right hardware to get it mounted securely.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 45310
- UPC: 841370106332
- Fits: Mossberg 500, 590, 835, 930, 935 (Post-1997)
- Rail Type: One-Piece Picatinny
- Material: 6061 T6 Extruded Aluminum
- Finish: Matte Black Anodized
- MOA: 0 MOA
- Center Spread: 2.125 in
- Height: 0.4 in (top of receiver to top of Picatinny)
- Weight: Approximately 2 oz
- Ring Compatibility: Picatinny or Weaver
- Ambidextrous: Yes
- Quick Disconnect Ring Compatible: No
- Color: Black
What’s Included
- EGW one-piece Picatinny rail scope mount
- #6-48 x 1/4 in mounting screws
- #8-40 x 1/4 in mounting screws
- T-10 Torx bit
Frequently Asked Questions
Does this EGW rail require drilling or tapping my Mossberg?
No. The rail is drilled to line up with the factory scope mount holes already present on your Mossberg receiver. Just remove any factory plugs, set the rail in place, and install the included screws with a dab of blue thread locker.
Will this fit both my Mossberg 930 autoloader and my 500 pump?
Yes. This mount covers the Mossberg 500, 590, 835, 930, and 935 models from post-1997 production. EGW includes both #6-48 and #8-40 screws so you have the correct hardware regardless of which model you're mounting it to.
What kind of scope rings does this rail accept?
The rail is cut to standard Picatinny spacing and accepts both Picatinny and Weaver style rings. The full-length cross slots give you plenty of room to position your rings for the right eye relief with whatever optic you choose.
Will the EGW rail block my factory iron sights?
In many setups it sits low enough that it won't obstruct the use of your factory iron sights, thanks to its low 0.4 inch height. Clearance can vary depending on your specific sight setup, so it's worth checking your configuration before heading to the range.




Reviews
There are no reviews yet.