$36.00
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The EGW 20 MOA Picatinny rail is a straightforward upgrade for anyone running a Savage Axis or Edge who wants to stretch their effective range. Machined from domestic 6061 T6 extruded aluminum with a matte black anodized finish, this one-piece base replaces the two-piece factory setup with something far more rigid and consistent. The full-length Picatinny cross slots let you slide your rings almost anywhere along the rail, which is a lifesaver when you're trying to nail down the right eye relief with a particular scope.
The real star here is the 20 MOA of forward cant. By angling the scope slightly downward toward the muzzle, you free up more of your optic's internal elevation travel, so you won't bottom out the turret when you're dialing for distance. EGW recommends this 20 MOA version for anyone shooting roughly 500 to 1000 yards, making it a smart pick for long range target work, the 6.5 Creedmoor crowd, and hunters who want extra holdover built right into the mount.
One of the best things about this rail is that fitment isn't a guessing game. Every Savage Axis, Axis II, Axis XP, Axis II XP, and the older Edge rifles all share the same receiver footprint regardless of caliber, so this single base covers the whole family. The center channel is milled out to trim weight, bringing the whole rail in right around 2 ounces, and it's ambidextrous so lefties are covered too.
Savage switched some newer Axis rifles over to larger #8-40 screws while older guns use #6-48, and EGW took the headache out of that. This mount comes with both sets of screws plus a T-10 bit, so no matter which year your rifle rolled off the line, it drops right on. For best results, torque the screws to around 20 inch-pounds and add a drop of blue thread locker. It's a Picatinny-style base, so it pairs with any standard Picatinny or Weaver rings you already own.
Yes. Every Savage Axis, Axis II, Axis XP, Axis II XP, and the older Edge rifles use the same receiver footprint no matter the chambering, from .223 up to .30-06. This single rail covers the entire Axis and Edge family.
No, EGW took the guesswork out of it. The rail ships with both #6-48 and #8-40 screws plus a T-10 bit, so it fits older Axis receivers as well as the newer ones that switched to the larger #8-40 holes.
The 20 MOA forward slope tilts your scope slightly downward, which gives you more usable internal elevation travel in the optic. That means you can dial for longer distances without running out of adjustment or bottoming out the turret. EGW recommends this version for shooting roughly 500 to 1000 yards.
This is a standard Picatinny-style base, so it works with any Picatinny or Weaver rings. Pick your ring height based on your scope's objective size and bell clearance. For install, torque the base screws to about 20 inch-pounds and use a drop of blue thread locker.
| UPC | 841370105748 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 41802 |
| Action | |
| Color | Black |
| Length | 8.2500 |
| Model | |
| Style | PICATINNY |
You must be logged in to post a review.
Reviews
There are no reviews yet.