$35.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Savage 210 is a dedicated bolt-action slug gun, and it deserves a mounting setup built around its exact receiver instead of a generic base that sort of fits. That's where this EGW rail comes in. It's machined specifically for the 210's 3.659 inch hole spacing, so it drops onto the receiver without fuss and gives your optic a true, repeatable foundation.
The whole thing is cut from domestic 6061 T6 aircraft aluminum and finished in a matte black Type II anodize that shrugs off field use. At roughly 2 to 3 ounces, it stays light, and the milled center channel trims weight while leaving factory iron sights usable in many cases. It runs full-length Picatinny cross slots, which is the part that really earns its keep, you can slide your rings fore and aft to dial in proper eye relief instead of being locked into one spot.
Slug guns kick, plain and simple. Those heavy loads put real shearing force on a scope base, and a flimsy two-piece setup can walk your zero loose over a season. This one-piece design bridges the receiver with a single block of aluminum, which stiffens the whole platform and keeps your point of impact honest shot after shot. The 0 MOA cant is the right call for typical slug gun ranges, keeping your optic's adjustment range centered where you need it.
Installation is straightforward. EGW includes the #6-48 mounting screws and a T-10 bit in the box, and they recommend torquing to 20 inch-pounds with a drop of blue threadlocker on the screws. It accepts both Picatinny and Weaver rings, so you've got plenty of options when it's time to pair it with glass. Add a set of quality rings and you've turned a package-grade mounting job into a serious, accurized slug gun setup.
Yes. This rail is machined specifically for the Savage Model 210 with its 3.659 inch center hole spacing, so it matches that receiver profile directly. It is not a universal base, so it's meant for the 210 and not other Savage actions.
It uses standard Picatinny or Weaver-style rings, which gives you a wide range of options. Choose your ring height based on your scope's objective diameter so the bell clears the rail and barrel. EGW's own Practical and HD rings pair well if you want a matched setup.
The 0 MOA cant has no built-in forward slope, which is ideal for the typical ranges a slug gun works at. It keeps your scope's internal elevation adjustment centered so you have room in both directions to zero.
It ships with #6-48 mounting screws and a T-10 bit. EGW recommends torquing the screws to 20 inch-pounds and adding a drop of blue threadlocker to keep everything tight under slug recoil. The center channel also leaves factory iron sights usable in many cases.
| UPC | 841370105700 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 41700 |
| Color | Black |
| Style | Picatinny Rail |
You must be logged in to post a review.
Reviews
There are no reviews yet.