0
0

EGW Savage 10-16 Flat Back Short Action 20 MOA Picatinny Rail

UPC: 841370105571

$35.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This EGW Picatinny rail is the answer for anyone trying to put a modern optic on an older Savage. It fits the pre-2003 "flat back" short action receivers, the ones built before the AccuTrigger era, and gives you a solid, slotted base to work with instead of hunting down vintage one-inch rings. Machined from domestic 6061-T6 aluminum and finished in matte black, it's a single piece that bolts right to the receiver with the included hardware.

The real draw here is the 20 MOA of built-in cant. That forward slope tilts your scope down a touch, which banks extra elevation in your turret so you can dial out to longer distances before bottoming out. If you're stretching a .308 or .243 past the 600-yard mark, that extra 20 minutes of angle makes a genuine difference. For closer-range hunting or plinking it still works great, you just won't need to lean on the full elevation range.

Fitting the EGW Flat Back Short Action Rail Correctly

Fitment is where you need to pay attention. Savage made flat back receivers in short, medium, and long lengths, and your caliber alone doesn't tell you which one you have. This rail is cut for the short action specifically, which measures 3.93 inches center to center between the two middle mounting holes. Before you order, pull a tape measure to that center spread. It fits models like the 110, 111, 112, 114, and 116 in short action flat rear configuration, and it will not fit any Savage with a round rear receiver.

Setting Up the Savage 10-16 Picatinny Base

Installation is straightforward with the screws and wrench that come in the box. EGW suggests about 20 inch-pounds of torque and a drop of blue threadlocker on the screws to keep everything locked in under recoil. The Picatinny profile accepts both Picatinny and Weaver-style rings, so you've got plenty of room to position your scope where it feels right, and in many cases it won't block your factory iron sights either.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 41202
  • UPC: 841370105571
  • Fitment: Savage Flat Back Short Action (Pre-2003)
  • Cant: 20 MOA
  • Center Hole Spread: 3.93 in (two middle holes)
  • Overall Length: 6.670 in
  • Material: 6061-T6 Aluminum
  • Finish: Matte Black
  • Rail Type: One-Piece Picatinny (accepts Picatinny or Weaver rings)
  • Action Type: Bolt Action
  • Hand: Ambidextrous
  • Country of Origin: United States

What’s Included

  • EGW Savage Flat Back Short Action 20 MOA Picatinny rail
  • Mounting screws
  • Torx wrench/bit

Frequently Asked Questions

Will this EGW rail fit my Savage?

It fits pre-2003 Savage flat back receivers in short action only, including models like the 110, 111, 112, 114, and 116 with a flat rear receiver. Before ordering, measure the center-to-center distance between the two middle mounting holes, which needs to be 3.93 inches. It does not fit any Savage with a round rear receiver or the medium and long action flat back versions.

What does the 20 MOA cant actually do for me?

The 20 MOA tilts the front of the rail down slightly, which gives you roughly 20 extra minutes of upward elevation travel in your scope. That matters most for long-range shooting, letting you dial a .308 or .243 way out there before running out of turret. For general hunting and shorter distances it still works fine, you just won't need the full range.

Does it work with standard scope rings?

Yes. It's a true Picatinny profile, so it accepts both Picatinny and Weaver-style rings. The multiple slots also let you slide your rings fore and aft to get proper eye relief with just about any scope.

How do I install it and what's included?

The mount comes with the mounting screws and a Torx wrench, so you've got what you need to get it on the receiver. EGW recommends torquing the screws to about 20 inch-pounds with a drop of blue threadlocker to keep things from backing out under recoil.

Additional information

UPC

841370105571

Manufacturer

Manufacturer Part Number

41202

Action

Color

Black

Model

Style

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “EGW Savage 10-16 Flat Back Short Action 20 MOA Picatinny Rail”