Description
If you own a Remington 710, 715, or 770, you already know the factory scope setup leaves a lot to be desired. This EGW 0 MOA Picatinny rail fixes that. It's a one-piece base machined from domestic 6061 T6 aircraft aluminum with a matte black anodized finish, giving you a rigid, no-nonsense foundation for whatever optic you want to run. It's drilled to line up with the factory scope mount holes, so there's no drilling or tapping involved. Just bolt it on and you're set.
Why the EGW 710/770 Rail Beats the Factory Mount
The real win here is flexibility. The Picatinny cross slots run the full length of the rail, so you can slide your rings forward or back to dial in proper eye relief. That's a genuine headache on the short-receiver 710/770 series, and this rail solves it. It accepts both Picatinny and Weaver-style rings, so you're not locked into one brand or style. A milled center channel keeps the weight down to around 2 to 3 ounces, and in many cases it won't get in the way of your factory iron sights.
Fitment and Build on the Remington 710/770 Picatinny Rail
This is the 0 MOA version, which means a flat, level mounting surface ideal for general hunting and range distances. The cross slots are cut to MIL-STD 1913 spec, the center spread between the middle holes measures 2.460 inches, and overall length runs 6.670 inches. Worth knowing up front: this is built specifically for the 710, 715, and 770 models and will not fit a Remington 700, 783, or 798/799, since their hole spacing is completely different.
Getting the EGW Rail Mounted Right
Installation is straightforward. The rail comes with #6 Torx screws and a T-10 bit, and EGW recommends torquing to 20 inch-pounds with a drop of blue Loctite on the threads to keep everything locked in under recoil. Made in the USA, it's a simple, durable upgrade that turns a budget hunting rifle into a far more capable shooter.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- MPN: 40900
- UPC: 841370105328
- Model Fit: Remington 710, 715, 770
- Elevation: 0 MOA
- Mount Type: One-Piece Picatinny Rail
- Ring Compatibility: Picatinny or Weaver
- Material: 6061 T6 Extruded Aluminum
- Finish: Matte Black Anodized
- Overall Length: 6.670 in
- Center Spread: 2.460 in (center-to-center of middle holes)
- Height: 0.4 in (top of receiver to top of rail)
- Weight: Approximately 2-3 oz
- Mounting Hardware: #6 Torx screws and T-10 bit included
- Country of Origin: Made in USA
What’s Included
- One-piece EGW Picatinny rail
- #6 Torx mounting screws
- T-10 bit/wrench
Frequently Asked Questions
Will this EGW rail fit a Remington 700?
No. The hole spacing on the 710, 715, and 770 measures 2.460 inches and is completely different from the Model 700. This rail will not line up with a Remington 700 receiver, and it also does not fit the 783 or 798/799 models.
Do I have to drill or tap my receiver to mount this rail?
No drilling or tapping required. The rail is drilled to line up with the factory scope mount holes already on your 710/770 receiver. It comes with the #6 Torx screws and T-10 bit you need, and EGW recommends 20 inch-pounds of torque with a drop of blue Loctite.
What scope rings do I need with this base?
This is a standard Picatinny-style base, so it accepts both Picatinny and Weaver-style rings. The full-length cross slots are cut to MIL-STD 1913 spec, giving you plenty of room to position your rings for correct eye relief. Rings are not included, so you'll want to grab a set that matches your scope tube diameter.
What does the 0 MOA designation mean for this rail?
A 0 MOA rail provides a flat, level mounting surface with no built-in forward cant. That's the right choice for general hunting and typical range distances where you don't need extra elevation for very long-range shooting. This particular EGW mount for the 710/770 is offered in 0 MOA only.




Reviews
There are no reviews yet.