Description
If you have been fighting with limited scope ring options on an older Remington pump or semi-auto, this EGW rail solves the problem in one shot. It takes the factory Weaver 93 hole pattern and turns it into a continuous one-piece Picatinny base, opening up fore-and-aft positioning for proper eye relief and compatibility with Picatinny or Weaver style rings. Whether you are setting up a 7600 for deer season or dropping a scope on a 7400, this gives you a solid, no-nonsense foundation.
What the EGW 40600 Rail Fits
This base follows the Weaver 93 footprint and bolts onto the Remington Model 4, Model 6, 7400, 7600, 750, and 7615. It also crosses over to several Benelli and Stoeger shotguns including the Benelli Auto, Super Black Eagle, Vinci, and M2, plus the Stoeger M3000 and M3500. It is worth measuring your receiver hole spacing against the 2.05 inch center spread before ordering, since some older guns were not drilled and tapped from the factory.
Build and Fit of the Remington 7400/7600 Picatinny Base
EGW machines the 40600 from domestic 6061 T6 extruded aluminum and finishes it with a matte black anodize that holds up to field use. The relieved center channel trims weight down to around 2 ounces and keeps the profile low, and in many cases it leaves your factory iron sights usable. At just 0.4 inch tall from the top of the receiver, it keeps your optic sitting close to the bore for a natural cheek weld.
Setting Up the 0 MOA Rail
The 0 MOA layout means there is no built-in forward cant, which is exactly what you want for general hunting and typical woods-to-mid-range distances. Installation is straightforward: EGW includes both #8-40 screw lengths to cover the variety of guns that share this pattern, along with a T-10 bit. Torque the screws to 20 in/lbs and you are ready to add rings and zero in. This is an ambidextrous base and works with standard Picatinny or Weaver rings.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 40600
- UPC: 841370105281
- Rail Type: One Piece Picatinny (Weaver 93 Footprint)
- Material: Domestic 6061 T6 Extruded Aluminum
- Finish: Matte Black Anodized
- Elevation: 0 MOA
- Center Spread: 2.05 in
- Overall Length: 5.488 in
- Height: 0.4 in (top of receiver to top of rail)
- Weight: Approx. 2 oz
- Ambidextrous: Yes
- Torque Spec: 20 in/lbs
- Quick Disconnect Ring Compatible: No
- Ring Compatibility: Picatinny or Weaver rings
- Made In: USA
What’s Included
- One-piece Picatinny rail base
- #8-40 x 1/4 in mounting screws
- #8-40 shorter length mounting screws
- T-10 bit
Frequently Asked Questions
What rifles and shotguns does the EGW 40600 rail fit?
It fits the Weaver 93 pattern, which covers the Remington Model 4, Model 6, 7400, 7600, 750, and 7615. It also fits several Benelli and Stoeger shotguns, including the Benelli Auto, Super Black Eagle, Vinci, and M2, plus the Stoeger M3000 and M3500. Measure your receiver hole spacing against the 2.05 inch center spread to confirm fit before mounting.
Does this EGW rail work with regular scope rings?
Yes. The 40600 is a one-piece Picatinny base, so it accepts standard Picatinny rings as well as Weaver style rings. The full-length cross slots let you position rings forward or back to dial in proper eye relief with your optic.
What does 0 MOA mean on this Remington scope base?
A 0 MOA base has no built-in forward elevation cant, so it keeps your optic level with the bore. That is the right choice for general hunting and typical shorter to mid-range distances where you do not need extra elevation travel for long shots.
Does the EGW 40600 come with mounting hardware?
It does. EGW includes two sets of #8-40 screws to accommodate the different guns that share this mounting pattern, along with a T-10 bit for installation. The recommended torque is 20 in/lbs.




Reviews
There are no reviews yet.