Description
If you're mounting glass on a 4-hole Remington XP-100, XR-100, or Model 7 short action, this EGW base takes the guesswork out of it. It's a single piece of machined aluminum, which means your rings and optic line up right the first time without the alignment headaches that come with two-piece setups. The full-length Picatinny cross slots give you room to slide rings and accessories wherever your eye relief and setup demand.
What Makes This EGW 4-Hole Rail Tick
EGW machines this base from domestic 6061-T6 extruded aluminum and finishes it in a matte black anodizing that holds up to real-world handling and weather. It runs 5.488 inches overall with a center spread of 3.351 inches, and a milled channel down the center keeps the weight down to right around 2 ounces. The low profile also means it won't get in the way of your factory iron sights in many setups.
0 MOA and Why It Matters on the Remington Short Action
This is the 0 MOA version, so the rail sits perfectly level with the receiver. That makes it the right pick for short to mid-range work, generally out to around 500 yards, where you don't need built-in elevation eating into your scope's adjustment range. If you're reaching way past that, the 20 MOA version is the better call, but for most hunting and target distances this flat rail keeps you centered up in your scope's travel.
Fitment and Installing the EGW XP/XR 100 Mount
This is the 4-hole pattern, built for the newer receivers with four mounting holes. If your action has three holes, you'll want the 3-hole version instead, so check your receiver before ordering. The mount is ambidextrous and ships with the hardware you need. EGW suggests torquing the screws to 20 inch-pounds and adding a drop of blue threadlocker for a base that stays put shot after shot.
Key Specifications
- Manufacturer: Evolution Gun Works (EGW)
- Manufacturer Part Number: 40220
- UPC: 841370105168
- Fits: Remington XP-100, XR-100, Model 7 Short Action (4-Hole)
- Cant: 0 MOA
- Rail Type: One-Piece Picatinny
- Material: 6061-T6 Extruded Aluminum
- Finish: Matte Black Anodized
- Overall Length: 5.488 in
- Center Spread: 3.351 in
- Weight: Approx. 2 oz
- Ring Compatibility: Picatinny / Weaver
- Ambidextrous: Yes
- Recommended Torque: 20 in-lbs
- Country of Origin: Made in USA
What’s Included
- EGW 4-Hole Short Action Picatinny Rail (0 MOA)
- Mounting screws
- T-10 bit
Frequently Asked Questions
Will this EGW rail fit my Remington short action?
This is the 4-hole version, made for the newer Remington XP-100, XR-100, and Model 7 short action receivers that have four mounting holes. Take a quick look at your receiver before ordering. If it has three holes instead of four, you'll want the 3-hole version of this mount.
Should I get the 0 MOA or the 20 MOA version?
The 0 MOA rail sits dead level with the receiver, which is ideal for short to mid-range shooting out to around 500 yards. It keeps your scope centered in its elevation travel. If you're regularly stretching past that distance, the 20 MOA version adds built-in elevation to help you reach farther without running out of adjustment.
What rings work with this Picatinny mount?
The rail uses standard Picatinny cross slots that run the full length of the base, so it accepts both Picatinny and Weaver style rings. The full-length slots let you position your rings to dial in proper eye relief.
How should I install the EGW base for the best hold?
EGW recommends torquing the mounting screws to 20 inch-pounds and adding a drop of blue threadlocker to keep everything locked down. The included T-10 bit handles the screws. Going by those specs helps the base stay put through recoil and repeated range trips.



Reviews
There are no reviews yet.