Description
If you're running an older three-hole Remington XP-100, XR-100, or short action Model 7, this EGW rail takes the guesswork out of getting your glass mounted solid. It replaces fussy two-piece bases with a single, rigid platform that bolts straight to the receiver, so your scope stays put and your zero holds through recoil. EGW has been turning out this kind of precision hardware since 1991, and it shows in the fit.
What the 0 MOA Cant Means for This EGW Rail
The 0 MOA designation means this base sits perfectly level with the receiver, no built-in elevation. That makes it the right pick for short to mid-range work out to around 500 yards, where you don't need extra angle to reach your target. If you're chasing long range and want to bank elevation in the mount itself, a 20 MOA version exists, but for most XP/XR 100 and Model 7 setups the flat 0 MOA is exactly what you want.
Built From 6061-T6 and Made in the USA
Each rail is CNC-machined from domestic 6061-T6 extruded aluminum and finished in a matte black Type II anodizing that shrugs off handling and weather. A channel milled down the center keeps the weight down to around 2 ounces, and in many cases that cutout still lets you run your factory iron sights underneath. The full-length Picatinny cross slots run the length of the rail, giving you plenty of room to slide rings fore and aft until your eye relief is dialed.
Fitting the EGW 3-Hole Scope Base
This is the three-hole pattern made for older receivers, so double-check your action has three screw holes before ordering. It accepts any standard Picatinny or Weaver-style rings, and EGW recommends torquing the base screws to 20 inch-pounds with a drop of blue thread locker for a lasting hold. Mounting hardware is included in the box so you can get it on the gun the day it arrives.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 40200
- UPC: 841370105144
- Fits: Remington XP-100, XR-100, Model 7 Short Action (3-Hole)
- Rail Type: One Piece Picatinny
- MOA Cant: 0 MOA
- Material: Domestic 6061-T6 Extruded Aluminum
- Finish: Matte Black Type II Anodizing
- Center Spread: 3.627 in
- Overall Length: 5.488 in
- Height: 0.4 in (top of receiver to top of Picatinny)
- Weight: 2 oz
- Ring Compatibility: Picatinny or Weaver-style rings
- Recommended Torque: 20 in-lbs
- Made In: USA
What’s Included
- EGW one-piece Picatinny scope rail
- Mounting hardware (screws and wrench/bit)
Frequently Asked Questions
Will this EGW rail fit my Remington Model 7 and XP-100?
It fits the Remington XP-100, XR-100, and short action Model 7 that use the three-hole receiver pattern. This is the version built for the older three-hole actions, so take a quick look at your receiver and confirm it has three screw holes before ordering. If yours has a four-hole pattern, you'll want a different EGW base.
What does 0 MOA mean and is it right for me?
A 0 MOA rail sits dead level with the receiver with no built-in elevation angle. That makes it the ideal choice for short to mid-range shooting out to roughly 500 yards, where you don't need extra elevation baked into the mount. If you plan on reaching way out and want more range in your scope's turret, a 20 MOA version is available instead.
What type of scope rings work with this base?
It uses a standard Picatinny profile, so any good set of Picatinny or Weaver-style rings will clamp right on. The full-length cross slots let you position your rings wherever you need them to get proper eye relief. Rings are not included, so plan to pick up a set sized to your scope tube diameter.
Does the rail come with mounting screws?
Yes, the mounting hardware is included so you can install it right out of the box. EGW recommends torquing the base screws to 20 inch-pounds and adding a drop of blue thread locker for a secure, lasting hold. A torque wrench is the easy way to avoid over-tightening into the aluminum.




Reviews
There are no reviews yet.