0
0

EGW Remington 700 722 40X Short Action 0 MOA Picatinny Rail

UPC: 841370104970

$36.00

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've got a Remington 700 short action and you're tired of fiddling with two-piece bases or outdated factory mounts, this EGW rail is the upgrade that just makes sense. It's a single-piece Picatinny base milled from domestic 6061 T6 extruded aluminum and finished in matte black anodizing, so it shrugs off scratches, corrosion, and years of range time. At roughly 2 ounces it won't weigh down your build, and the full-length cross slots give you all the room you need to position rings and accessories exactly where you want them.

This is the 0 MOA version, which means the rail sits flat with no built-in elevation taper. That's the right pick for general hunting and shooting out to around 500 yards, where you want your scope's adjustment range centered. If you're reaching way past that into long-range territory, a 20 MOA base is the better tool, but for the vast majority of real-world use the 0 MOA keeps things simple and your reticle well within its travel.

Fitment for Your Remington 700 Short Action

The bolt pattern matches short action Remington 700 receivers (think .223 and .308 footprints), along with the Remington 722, 40X, and the 700 Ultimate Muzzleloader. It also fits Bergara B14 models that use #6 screws, plus Christensen Arms short actions. Worth noting: this one is too low for the Remington 700 PCR and CP, and the bolt spacing does not translate to the Howa 1500 or Weatherby Vanguard despite looking similar.

What Makes the EGW Rail Worth It

Builders consistently point out the clean finish, the dead-straight fit to the receiver, and the fact that it performs like bases costing a good bit more. The relief channel down the center trims weight and, on many setups, keeps factory iron sights usable. It's ambidextrous with beveled edges, compatible with both Picatinny and Weaver rings, and the whole thing is made in the USA. Install is straightforward: torque the screws to 20 inch-pounds with a drop of blue thread locker and you're set.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 40000
  • UPC: 841370104970
  • Rail Type: One-Piece Picatinny
  • MOA: 0 MOA
  • Action Length: Short Action
  • Material: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black Anodizing
  • Center Spread: 3.627"
  • Overall Length: 6.276"
  • Height: 0.4" (top of receiver to top of Picatinny)
  • Weight: 2 oz
  • Ambidextrous: Yes
  • Ring Compatibility: Picatinny or Weaver
  • Torque Spec: 20 in-lbs
  • Made In: USA

What’s Included

  • EGW one-piece Picatinny rail
  • #6-48 mounting screws
  • #8-40 mounting screws
  • T-10 bit

Frequently Asked Questions

Will this EGW rail fit my Remington 700 short action?

Yes, it's built for the short action Remington 700 bolt pattern, including common .223 and .308 footprint receivers. It also fits the Remington 722, 40X, and 700 Ultimate Muzzleloader, plus Bergara B14 models drilled for #6 screws and Christensen Arms short actions. It will not fit the Remington 700 PCR or CP since it sits too low for those, and it does not work on the Howa 1500 or Weatherby Vanguard.

Should I get the 0 MOA or a 20 MOA version?

The 0 MOA rail is the way to go for general hunting and shooting roughly out to 500 yards, since it keeps your scope's elevation travel centered. If you're pushing well past that into long-range work, a 20 MOA base adds built-in taper to give you more usable elevation. For most Remington 700 setups, the 0 MOA covers you just fine.

What rings work with this Picatinny rail?

It's a true Picatinny-style base, so any Picatinny or Weaver scope rings will mount up without issue. The cross slots run the full length of the rail, which gives you plenty of flexibility to slide your rings forward or back for proper eye relief. Note that it is not quick-disconnect ring compatible.

How do I install the EGW Remington 700 rail?

Installation is simple and the hardware is included in the box. Clean the receiver holes, apply a drop of blue thread locker to each screw, and torque them to 20 inch-pounds. That combination keeps the rail locked down tight and holding zero through recoil.

Additional information

UPC

841370104970

Manufacturer

Manufacturer Part Number

40000

Color

Black

Length

8.9000

Model

Style

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “EGW Remington 700 722 40X Short Action 0 MOA Picatinny Rail”