Description
The American Defense AD-RECON-S 34mm mount is a straight-up, one-piece quick-detach base made for runners who want their 34mm optic locked down tight with zero drama. Unlike the cantilever Recon mounts, this one has no forward offset, so your scope sits centered over the rail rather than thrown out front. That makes it a natural fit for bolt guns, precision rigs, and any flat-top platform where you've got enough rail real estate to position the glass right where you want it. The rings sit at a 1.5-inch centerline height and carry a 0 MOA cant for a neutral, level sighting plane.
What Sets the AD-RECON-S 34mm Apart
The heart of this mount is ADM's QD Auto Lock lever system. You can adjust the tension with your finger or a flat-blade screwdriver, no proprietary tools required, and it's built to clamp down on both in-spec and out-of-spec Picatinny rails. That means consistent, repeatable return to zero when you remove and reinstall the mount, which is the whole point of running a quick-detach in the first place. The levers can be set up to lock front or rear depending on how your setup is laid out.
Build Quality on the Recon-S Mount
Every AD-RECON-S is precision CNC machined from a solid block of 6061-T6 aluminum and finished in a hard coat Type III Mil-Spec anodize that shrugs off weather and wear. The vertically split rings are self-centering and don't need lapping, and they're interchangeable if you ever change tube sizes down the road. It tips the scale around 8.5 ounces, so you're getting serious holding power without a heavy penalty.
Folks who run these report the same thing over and over: throw a 34mm tube like a Vortex Razor on top, snug the levers, and it holds dead-on through long strings of fire. It's a straightforward, no-nonsense piece of gear backed by American Defense's lifetime warranty and built in Wisconsin.
Key Specifications
- Manufacturer: American Defense Mfg
- Manufacturer Part Number: AD-RECON-S-34-STD
- UPC: 818503012242
- Model: AD-RECON-S
- Tube Diameter: 34mm
- Elevation Cant: 0 MOA
- Centerline Height: 1.5 in
- Design: Straight / No Forward Offset
- Lever Type: Standard Lever
- Attachment: QD Auto Lock, Picatinny / M1913
- Material: 6061-T6 Aluminum
- Finish: Hard Coat Type III Mil-Spec Anodize
- Color: Black
- Weight: Approx. 8.5 oz
- Country of Origin: Made in USA
What’s Included
- American Defense AD-RECON-S 34mm 0 MOA scope mount with QD standard levers
Frequently Asked Questions
Does the AD-RECON-S 34mm mount have a cantilever or forward offset?
No, the Recon-S is a straight-up design with no forward offset, so the rings sit centered over the rail rather than reaching out front. If you need the scope pushed forward for more eye relief on an AR-pattern rifle, look at the standard cantilever Recon instead. The straight design makes the Recon-S a strong choice for bolt actions and precision rigs with plenty of rail to work with.
Will this mount hold zero when I take it on and off?
That's exactly what it's built for. The QD Auto Lock lever system is designed for repeatable return to zero every time you remove and reinstall the mount, and users consistently report staying dead-on or within a fraction of a minute after remounting. It's one of the main reasons people reach for American Defense mounts.
What rail does the AD-RECON-S 34mm mount fit?
It clamps onto standard Picatinny / M1913 rails, and the tension is adjustable with your finger or a flat-blade screwdriver, no special tools needed. The QD Auto Lock system is built to grab both in-spec and out-of-spec rails for a solid lockup. You can also configure the levers to lock toward the front or rear.
How tall does this mount sit and what cant does it have?
The AD-RECON-S 34mm places your optic at a 1.5-inch centerline height with a 0 MOA cant for a level, neutral sighting plane. That neutral setup is ideal when you're not trying to squeeze out extra elevation for extreme long range. For dialing long distance, some shooters opt for a canted version like a 20 MOA base.




Reviews
There are no reviews yet.