Description
The Geissele Super Precision Aimpoint PRO mount takes the rock-solid reputation Geissele earned building triggers and rails and applies it to holding your red dot steady. It's machined from a single piece of 7075-T6 high-strength aluminum and wears a Type 3 hard coat anodized finish in matte black, so it shrugs off recoil, rough handling, and weather without flinching. This is the kind of mount you bolt on once and stop thinking about.
What Sets the Super Precision PRO Mount Apart
The real magic is in how it clamps. Geissele uses an updated take on the classic nut-and-bolt system that pulls the mount down onto your rail with roughly 1,400 pounds of clamping force, and it backs that up with three shear lugs for serious rigidity. The payoff is excellent return-to-zero. Pull the optic off to swap rifles or clean, put it back on, and your point of impact stays put. The forward-swept design also leaves room behind the optic for a magnifier or night vision device if you run one.
Fit and Height for Your Aimpoint PRO
This mount sits at 1.54 inches from the top of the Picatinny rail to the centerline of the optic, which puts an Aimpoint PRO at absolute co-witness with standard AR-height iron sights. Because the Aimpoint PRO, CompM2, CompML2, CompM3, and CompML3 all share the same 30mm M68-style body, this mount works across that whole family of sights, not just the PRO. It drops onto any flattop AR-15 rail and gives you flexibility on where you position the dot.
Built in the USA
Geissele machines these in the United States, and the attention to detail shows. The single-block construction means fewer parts to loosen up over time and a lighter, more rigid platform than a lot of factory mounts. If you've got an Aimpoint PRO and want a mount that matches the optic's duty-grade toughness, this is a straightforward upgrade.
Key Specifications
- Manufacturer: Geissele Automatics
- Model/Series: Super Precision
- Manufacturer Part Number (MPN): 05-625B
- UPC: 817953023280
- Color: Matte Black
- Finish: Type 3 Hard Coat Anodized
- Material: 7075-T6 Aluminum
- Ring Size: 30mm
- Mount Height: 1.54 in (rail to optic centerline)
- Co-Witness: Absolute Co-Witness
- Clamping Force: 1,400 lb
- Shear Lugs: 3
- Rail Compatibility: Picatinny
- Optic Compatibility: Aimpoint PRO, CompM2, CompML2, CompM3, CompML3
- Country of Origin: USA
What’s Included
- Geissele Super Precision Aimpoint PRO optic mount
- Mounting hardware
Frequently Asked Questions
What optics does the Geissele Super Precision Aimpoint PRO mount fit?
It's built for the Aimpoint PRO, but because that optic shares the same 30mm M68-style body as several others, it also fits the Aimpoint CompM2, CompML2, CompM3, and CompML3. Any of those sights will drop right in. It's a 30mm ring, so it won't work with micro-style optics like the T1 or T2.
What height is this mount and will it co-witness with iron sights?
The mount measures 1.54 inches from the top of the Picatinny rail to the centerline of the optic. That puts an Aimpoint PRO at absolute co-witness with standard AR-height iron sights. If you prefer a lower 1/3 or 1.93-inch 'heads-up' height, this particular model isn't that configuration.
How secure is the Aimpoint PRO mount and does it hold zero?
It clamps to your rail with around 1,400 pounds of force and uses three shear lugs for rigidity, which is a big part of why it has such a strong reputation for return-to-zero. Pull the optic off and reinstall it, and your point of impact stays consistent. That makes it a dependable choice for duty use, hunting, or any setup where you can't afford a wandering zero.
What is this mount made of and where is it made?
It's CNC-machined from a single piece of 7075-T6 high-strength aluminum and finished in a Type 3 hard coat anodized matte black. The single-block construction keeps it light and rigid with fewer parts to loosen up over time. Geissele manufactures it in the USA.




Reviews
There are no reviews yet.