$79.20
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The L.E. Wilson 300 Norma Magnum bullet seating die is the chamber type seater that competitive reloaders keep coming back to. Instead of threading into a press like a standard 7/8-14 die, this one fully captures the case and bullet before anything moves, so the bullet gets pushed straight into the case mouth by a close-fitting seating stem. The result is loaded rounds with minimal runout and the kind of repeatable concentricity that makes a real difference once you stretch a 300 Norma out past distance.
This is a hand die built for use with an arbor press. You drop your sized and primed case into the die body, set your bullet, and let the seating stem do the alignment work. Because both the case and the bullet are held in perfect agreement before seating starts, there is far less room for the tilt and inconsistency you can get with conventional dies. For a cartridge like the 300 Norma Magnum, which is a .338 Norma case necked down to .30 caliber and built for serious long-range work, that attention to straightness pays off on paper.
The die is machined from stainless steel for strength and a long service life, with clean laser-engraved markings so you always know what you are grabbing on the bench. It is a simple, no-nonsense tool with nothing to break or wear out quickly, which is a big part of why it has such a strong following among precision handloaders. Every one of these is made in the USA.
Worth noting: this is the standard chamber type seater, not the micrometer-adjust version. Seating depth is set with shims and the seating stem, which is quick to dial in at the bench or even at the range once you learn your rifle's sweet spot. If you want fine, repeatable depth tweaks in a hurry, the shim system gets you there without fuss.
Yes. This is a chamber type hand die designed to be used with an arbor press rather than a conventional threaded reloading press. The case and bullet seat vertically as you press the stem down, which is where the straight-line accuracy comes from.
No, this is the standard chamber type seater. Seating depth is adjusted using shims and the seating stem rather than a built-in micrometer. L.E. Wilson does offer a separate micrometer-adjust model under a different part number if you prefer a dial for fine depth changes.
A chamber type die fully captures both the case and the bullet before seating begins, keeping everything in alignment and producing loaded rounds with very little runout. Precision and long-range reloaders favor this design because better concentricity translates directly into tighter groups at distance.
Yes. This die only seats bullets, so you will need a sizing die to resize and prep your brass before seating. Many reloaders pair this seater with a Wilson full-length or bushing sizing die for a complete setup.
| UPC | 815145026996 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BS-30NMG |
You must be logged in to post a review.
Reviews
There are no reviews yet.