0
0

L.E. Wilson 28 Nosler Bushing Full Length Sizing Die FLD-28NS

UPC: 815145026446

$116.16

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 28 Nosler is a hard-charging 7mm magnum that burns a lot of powder and works brass hard, so the dies you feed it really matter. This L.E. Wilson Bushing Type Full Length Sizing Die handles everything you need from a resize in a single stroke: it sizes the case body, bumps the shoulder back to set correct headspace, controls neck tension with an interchangeable bushing, and deprimes the spent primer. It threads right into any standard 7/8"-14 reloading press, so there's no special equipment to buy to put it to work.

What Sets the 28 Nosler Bushing Die Apart

The big draw here is the bushing system. Instead of yanking an expander ball back through the case neck, this die sizes the outside of the neck with a bushing you select to match your brass and bullet. Pick your bushing based on your neck wall thickness and bullet diameter, and you dial in exactly the neck tension you want. That means less brass working, straighter necks, and brass that lasts longer, which is a real benefit on an expensive, high-pressure case like the 28 Nosler. Keep in mind bushings are sold separately so you can match the size to your specific load.

Built to Last

L.E. Wilson has been making handloading tools since 1927, and the reputation shows in the steel. The die body is hardened to Wilson's own specs, harder than a Grade 8 bolt, and it runs stainless parts for a long service life. It's made in the USA and comes with an adjustable depth decapping rod plus a spare decapping punch, so you can fine-tune pin depth and keep running even if you bend one.

Dialing In Your Setup

To get the most out of this die, pair it with an L.E. Wilson Case Gage. Measuring an as-fired case against a sized case lets you set shoulder bump precisely, usually around .002" for a bolt gun and .004" for a semi-auto. That keeps you from overworking the brass and ensures rounds chamber smooth and consistent, which is where the accuracy lives.

Key Specifications

  • Manufacturer: L.E. Wilson
  • Manufacturer Part Number: FLD-28NS
  • UPC: 815145026446
  • Caliber: 28 Nosler
  • Die Type: Bushing Type Full Length Sizing Die
  • Neck Tension Control: Interchangeable bushings (sold separately)
  • Expander Ball: None, uses bushing
  • Press Compatibility: Standard 7/8"-14 reloading presses
  • Material: Hardened steel body with stainless parts
  • Hardness: Harder than a Grade 8 bolt
  • Decapping Rod: Adjustable depth
  • Country of Origin: Made in the USA

What’s Included

  • One L.E. Wilson 28 Nosler Bushing Full Length Sizing Die body
  • Decapping rod (adjustable depth)
  • Extra decapping punch
  • Lock nut with extra pad and screw
  • 3/32" hex wrench

Frequently Asked Questions

Does the 28 Nosler bushing full length die come with bushings?

No, bushings are sold separately. This lets you pick the exact bushing size for your brass and bullet combination to get the neck tension you want. To find your bushing, measure your case neck wall thickness and bullet diameter, then size accordingly for the right amount of grip.

What does this die do in a single pass?

It sizes the case body, bumps the shoulder back to set correct headspace, controls neck tension with the bushing, and deprimes the spent primer all in one stroke. Because it uses a bushing instead of an expander ball, the brass gets worked less, which helps with concentricity and case life. That's a big plus on a high-pressure cartridge like the 28 Nosler.

Will this fit my reloading press?

Yes, it's threaded for standard 7/8"-14 reloading presses, so it drops right into the gear most handloaders already run. There's no proprietary press or adapter needed. Just thread it in, set your shoulder bump, and you're ready to size.

How do I set the shoulder bump correctly?

The best way is to pair the die with an L.E. Wilson Case Gage. Measure an as-fired case, then a sized case, and adjust the die until you get the bump you want, typically around .002" for a bolt gun and .004" for a semi-auto. This keeps you from overworking the brass and ensures smooth, consistent chambering.

Additional information

UPC

815145026446

Manufacturer

Manufacturer Part Number

FLD-28NS

Reviews

There are no reviews yet.

Be the first to review “L.E. Wilson 28 Nosler Bushing Full Length Sizing Die FLD-28NS”