0
0

L.E. Wilson Steel Neck Sizer Die Bushing .261 (B-261)

UPC: 815145024510

$22.88

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're chasing consistent neck tension and tighter groups, a quality bushing is one of the smallest parts in your reloading setup that makes one of the biggest differences. This is the L.E. Wilson Steel Neck Sizer Die Bushing in a .261 diameter, part number B-261. It's the piece that drops into your bushing-style die and does the actual neck sizing, letting you grip the bullet with the exact amount of tension your load calls for.

L.E. Wilson has been building precision reloading tools for the better part of a century, and their bushings are a staple on the benches of precision and competition reloaders. The big advantage of a bushing setup is that it sizes the outside of the case neck without dragging an expander ball back through, which cuts down on how much you work the brass. Less brass working means better concentricity, longer case life, and more repeatable neck tension round after round.

How the .261 Bushing Sizes Your Brass

The number stamped on the bushing refers to the diameter at the middle, and Wilson reams them with a slight taper. Because the case neck only reaches the center, you can flip the bushing over with the markings facing down to pick up a touch more sizing if you want it. These are steel bushings, so a light coat of case lube on the necks keeps things running smooth.

Picking the Right Bushing Size

The common rule is to measure the outside neck diameter of a loaded cartridge and subtract .002 to .003 inches, which leaves roughly .001 inch of spring-back for proper neck tension. Keep in mind that different brands of brass have different neck wall thickness, so you may land on a slightly different size depending on what you're running.

Fits More Than Just Wilson Dies

Wilson bushings use the universal bushing standard, so this .261 will interchange across Wilson, Redding, Hornady, and RCBS bushing-type dies. That makes it an easy addition whether you're running a dedicated Wilson neck sizer or building out a set of bushings for another brand's die.

Key Specifications

  • Manufacturer: L.E. Wilson
  • Manufacturer Part Number: B-261
  • UPC: 815145024510
  • Bushing Diameter: .261 inch
  • Material: Hardened Steel
  • Type: Neck Sizing / Full Length Sizing Die Bushing
  • Sizing Increments: .001 inch
  • Internal Taper: .003 inch (reamed)
  • Compatibility: Wilson, Redding, Hornady, and RCBS bushing-type dies
  • Country of Origin: United States

What’s Included

  • One L.E. Wilson .261 steel neck sizer die bushing (B-261)

Frequently Asked Questions

What dies does the .261 Wilson bushing fit?

The .261 bushing uses the universal bushing standard, so it will interchange in Wilson, Redding, Hornady, and RCBS bushing-type sizing dies. It will not fit Forster dies. It works in both neck sizing and bushing-style full-length sizing dies.

How do I know if the .261 is the right bushing size for my load?

Measure the outside neck diameter of a loaded cartridge and subtract .002 to .003 inches, which leaves about .001 inch of spring-back for proper neck tension. Since neck wall thickness varies between brass brands, it's smart to confirm against the brass you actually load. Many reloaders keep a couple of sizes on hand to fine-tune tension.

Do I need to lubricate this steel bushing?

Yes. These are steel bushings, so a light coat of case lube on the necks is recommended before sizing to keep things running smoothly and protect your brass. Stainless and coated bushings can sometimes be run dry, but steel bushings want that light lube.

Why run a bushing die instead of a standard neck sizer?

A bushing sizes the outside of the case neck without pulling an expander ball back through, which reduces how much you work the brass. That translates to better concentricity, longer case life, and more consistent neck tension from one loading to the next. It's a favorite setup among precision and competition reloaders.

Additional information

UPC

815145024510

Manufacturer

Manufacturer Part Number

B-261

Reviews

There are no reviews yet.

Be the first to review “L.E. Wilson Steel Neck Sizer Die Bushing .261 (B-261)”