$17.60
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you shoot the PPC family and take your brass prep seriously, this is the holder that pairs with your L.E. Wilson case trimmer to keep every trim consistent. It's cut for fired, neck-sized brass in the 17 PPC, 20 PPC, 22 PPC, and 6mm PPC family, and the oversized machining gives a touch more clearance for chambers that run a hair bigger than standard. The holder supports the case along its body taper rather than gripping the case head, which is the whole reason Wilson's setup delivers such clean, repeatable results.
Drop a fired case in, tap the head on a firm surface to seat it, and run it into the trimmer. Because the holder cradles the body much like the chamber of a rifle, the case sits square every single time. Beyond trimming to length, this same holder works for primer pocket reaming, neck reaming, and deburring when you add the L.E. Wilson Uniform Deburring tool, which is sold separately.
L.E. Wilson has been making case holders and trimmers since the 1930s, and that experience shows in the fit and finish here. The steel body is precisely machined for consistent results and shrugs off years of use on a busy loading bench. For benchrest and varmint folks chasing tight groups, brass that's trimmed to a uniform length is one of the small details that adds up downrange.
This is the fired-case version, meaning it's set up for neck-sized brass rather than brand new or full-length resized cases. If you full-length size your PPC brass, you'll want the new-case holder instead. Wilson machines these to fit the vast majority of chambers out there, so for most PPC setups this oversized holder slides right into your workflow. Made in the U.S.A.
No, this is the fired-case version and it's designed for neck-sized brass only. If you full-length resize your PPC cases, you'll want the new-case holder instead. Matching the holder to how you size your brass is what keeps your trims consistent.
It fits the PPC family, including 17 PPC, 20 PPC, 22 PPC, and 6mm PPC. Since these cases share the same parent case geometry, one holder handles the whole family. The oversized machining gives a little extra clearance for chambers that run slightly larger than standard.
Yes, the case holder is made to be used with the L.E. Wilson Case Trimmer and is not a standalone tool. You simply seat the fired case in the holder, tap the head on a firm surface, and run it into the trimmer. The same holder also supports primer pocket reaming, neck reaming, and deburring with the Wilson Uniform Deburring tool, which is sold separately.
Wilson's design supports the case along its body taper, much like the chamber of a rifle. That means the case sits square and centered every time, which is where the repeatable, uniform trims come from. It's a big part of why precision and benchrest loaders favor this system.
| UPC | 815145020840 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | CH-PPC0 |
You must be logged in to post a review.
Reviews
There are no reviews yet.