$17.60
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The L.E. Wilson 220 Swift Fired Case Holder is one of those small reloading parts that makes a big difference once it's on your bench. It's cut specifically for .220 Swift brass and works hand in hand with the L.E. Wilson Case Trimmer. Instead of grabbing the case by the head like a shellholder, this one cradles the case by its body taper, supporting the brass much the same way a rifle chamber does. That full-body support is the reason Wilson trimmers have such a strong reputation for turning out consistent, square case mouths.
This is the FIRED version, which means it's sized for neck-sized .220 Swift brass rather than new or full-length resized cases. If you're running a neck-sizing setup to keep your fire-formed brass tight to your chamber, this is the holder you want. Beyond trimming to length, it also holds the case steady for primer pocket reaming, neck reaming, and deburring when you're using the L.E. Wilson Uniform Deburring Tool, so it earns its spot through the whole prep process.
Everything here comes down to repeatability. Because the case is referenced off its body rather than the rim, you get the same cut depth across the whole batch, which matters when you're chasing accuracy with a flat-shooting varmint round like the Swift. The holders are precision machined in the USA and finished to hold up to a lifetime of bench use. Drop the case in, give the head a light tap on a firm surface, slide it into the trimmer, and you're trimming. When you're done, a tap on the case mouth releases it.
Keep in mind this holder is built for use with the L.E. Wilson Case Trimmer and isn't a universal shellholder for your press. If you've already got a Wilson trimmer on the bench and you're loading .220 Swift, this is the piece that ties it all together.
This is the fired version, so it's made for neck-sized .220 Swift brass. If your cases have been full-length resized or are brand new, you'll want the new case holder instead. Matching the holder to how your brass is prepped is what keeps the trim consistent.
Yes. The 220 Swift case holder is designed to work with the L.E. Wilson Case Trimmer and isn't a shellholder for a reloading press. It drops into the trimmer and cradles the case while you work.
It can. Along with trimming to length, the holder keeps the case steady for primer pocket reaming, neck reaming, and deburring when paired with the L.E. Wilson Uniform Deburring Tool. That makes it useful across several steps of your case prep.
Instead of holding the case by the head, it supports the case along its body taper, similar to the way a rifle chamber supports a round. That full-body support is what gives Wilson trimmers their consistency and keeps cut depth even across a batch.
| UPC | 815145020437 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | CH-220SW |
You must be logged in to post a review.
Reviews
There are no reviews yet.