0
0

Manticore Arms Tavor Gasketed Port Cover for SAR & X95 (MA-11900)

UPC: 811359020843

$55.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Anybody who has run a suppressed Tavor knows the problem: with the can screwed on, gas backs up and blows right out the closed ejection port, straight at the side of your head. The Manticore Arms Tavor Gasketed Port Cover fixes that with a genuinely clever approach. Instead of just clamping a plate over the port and hoping for the best, it sandwiches a compressible rubber gasket between an inner and outer aluminum panel. Two screws pull the panels together, squeezing the gasket so it expands into every gap and irregularity for a real gas-tight seal.

What Sets the Gasketed Port Cover Apart

Most off-side port covers on the market rely on tight tolerances alone. This one uses the gasket to do the sealing, which means it fills in the little surface imperfections that let gas sneak through on plate-only designs. That difference shows up the most when you're shooting suppressed and want to keep blowback and grit away from your eyes and cheek.

Fitment and Features on the Tavor Port Cover

This cover is ambidextrous, so it drops onto either the left or right ejection port depending on how you run your rifle. It also has an integral QD pocket, giving you a clean sling mounting point right where you need it. It's built from 6061 hardcoat anodized aluminum with a rubber-like gasket, weighs in around 1.7 ounces, and is made in the USA. One important note on fitment: it works with the 5.56, 300 Blackout, and 9mm Tavor SAR and X95, but it does not fit the .308 Tavor 7.

Installing the Manticore Gasketed Port Cover

Installation is about as painless as it gets. All the hardware, tools, and instructions come in the box, and most folks have it buttoned up in just a couple of minutes with no gunsmithing required. If you're a lefty shooting a right-configured Tavor, or you just want your off-side port sealed for suppressed shooting, this is one of the simpler upgrades you can make.

Key Specifications

  • Manufacturer: Manticore Arms
  • MPN: MA-11900
  • UPC: 811359020843
  • Model: Gasketed Ejection Port Cover
  • Fits: IWI Tavor SAR and X95 (5.56 / 300 BLK / 9mm)
  • Does Not Fit: .308 Tavor 7 (7.62 NATO)
  • Material: 6061 Aluminum with rubber-like polymer gasket
  • Finish: Mil-Spec Type III Hardcoat Anodized Black
  • Orientation: Ambidextrous (left or right port)
  • Sling Mount: Integral QD sling swivel pocket
  • Weight: 1.7 oz
  • Country of Origin: USA

What’s Included

  • Gasketed port cover (inner and outer panels with gasket)
  • All mounting hardware
  • Installation tools
  • Instructions

Frequently Asked Questions

Will the Tavor Gasketed Port Cover fit my Tavor 7?

No, this cover does not fit the .308 caliber Tavor 7 (7.62 NATO). It is designed for the 5.56, 300 Blackout, and 9mm Tavor SAR and Tavor X95 only. If you're running a .308 Tavor 7, you'll need a cover made specifically for that platform.

Why should I run a gasketed port cover instead of a standard one?

The gasket is the whole point. By squeezing a rubber gasket between two panels, it fills in surface gaps that plate-only covers can leave open, so it blocks gas more reliably. That matters most when shooting suppressed, since it helps keep blowback and gas from venting out the closed ejection port toward your face.

Can I use this on either side of my Tavor?

Yes, the Manticore port cover is fully ambidextrous and installs on either the left or right ejection port. That makes it a good pick whether you shoot right-handed or left-handed. It also includes an integral QD pocket so you get a sling mounting point wherever you install it.

Is installation complicated?

Not at all. Everything you need comes in the box, including the hardware, tools, and instructions. Most people have it installed in just a couple of minutes with no gunsmithing needed.

Additional information

UPC

811359020843

Manufacturer

Manufacturer Part Number

MA-11900

Color

GASKETED PORT COVER

Length

8.1500

Reviews

There are no reviews yet.

Be the first to review “Manticore Arms Tavor Gasketed Port Cover for SAR & X95 (MA-11900)”