0
0

Eylar 20″ Large Hard Gear Case with RAGAR Foam Inserts, Black

UPC: 810161051830

$119.99

8 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Eylar 20" Large Hard Gear Case is built for people who care about what's inside it. The polypropylene shell is rated IP67, which means it shrugs off dust, water, and hard knocks, and the rubber gasket lining keeps everything dry even if the case takes a dunk in up to a meter of water. Add in ABS latches and steel pins, and you've got a case that can ride in a truck bed, a boat, or the belly of a plane and keep your gear right where you put it.

What Makes the RAGAR Foam Different

Most hard cases come with pluck-and-pull foam, which works fine until you change your loadout and end up with a cavity that no longer fits. The RAGAR system solves that. It uses interlocking foam pieces cut in a tessellating pattern, so each piece drops back into any open spot regardless of orientation. Swap a pistol for a camera body, add a new optic or accessory, and you just pull and rearrange the pieces to build a fresh custom cradle. No tearing, no waste, and no tools required. This model ships with two RAGAR layers plus a bottom foam layer and an egg-crate top layer for full-perimeter cushioning.

Traveling With the Eylar 20" Hard Case

External dimensions run about 19.78" x 15.77" x 7.41" with an interior of roughly 18.06" x 12.89" x 6.72", and the whole thing weighs around 9.5 pounds empty. The lockable hasps meet TSA requirements and accept padlocks for secure storage at home or on the road. A pressure equalization valve lets trapped air escape so the case opens easily after altitude or temperature swings, and the stackable design keeps your gear room tidy.

Who Reaches for a Case Like This

This size is a sweet spot. It's roomy enough for a couple of handguns and accessories, a DSLR kit with lenses, a drone and its controller, or a pile of sensitive electronics and field tools. Eylar backs it with a limited lifetime warranty, so it's the kind of case you buy once and use for years.

Key Specifications

  • Manufacturer: Eylar
  • Manufacturer Part Number: SA00002-BLK-RG-XP
  • UPC: 810161051830
  • Color: Black
  • External Dimensions: 19.78" x 15.77" x 7.41"
  • Internal Dimensions: 18.06" x 12.89" x 6.72"
  • Weight: 9.5 lbs (empty)
  • Shell Material: Polypropylene with ABS latches and steel pins
  • Protection Rating: IP67 waterproof, dustproof, shockproof
  • Water Resistance: Submersible up to 1 meter (3.2 ft)
  • Foam System: RAGAR reconfigurable Crosslinked XP foam
  • Foam Layers: 2 RAGAR layers, 1 bottom foam layer, 1 egg-crate layer
  • Locking: TSA-compliant lockable hasps
  • Valve: Pressure equalization valve
  • Warranty: Limited lifetime

What’s Included

  • 20" Eylar large hard gear case (black)
  • 2 RAGAR reconfigurable and reusable Crosslinked XP foam layers
  • 1 bottom foam layer
  • 1 egg-crate foam layer

Frequently Asked Questions

How is the RAGAR foam different from standard pluck-and-pull foam in this hard gear case?

Standard pluck-and-pull foam is a one-time deal, since once you tear out the cubes for one item, that cavity is set for good. The RAGAR foam in this case uses interlocking pieces cut in a tessellating pattern, so each piece fits back into any open spot no matter how you turn it. When your gear changes, you just rearrange the pieces to build a new custom fit with no tearing and no waste.

Is the Eylar 20" hard case really waterproof?

Yes. It carries an IP67 rating and has a rubber gasket lining that seals out dust and water, offering protection for up to one meter of full submersion. That makes it a solid pick for boats, kayaks, or any job where your gear might see rain or spray.

What can I fit inside this 20" gear case?

With an interior around 18.06" x 12.89" x 6.72", it handles a couple of handguns and accessories, a DSLR camera with lenses, a drone with its controller, or a mix of electronics and field tools. Because the RAGAR foam is fully reconfigurable, you can lay out the interior to match whatever you're carrying and change it later.

Can I lock this case for travel?

The case has lockable hasps that meet TSA requirements and accept padlocks, so you can secure it at home or when you fly. It also has a pressure equalization valve that lets trapped air escape, which keeps the lid from vacuum-locking after altitude or temperature changes.

Additional information

UPC

810161051830

Manufacturer

Manufacturer Part Number

SA00002-BLK-RG-XP

Color

Black

Reviews

There are no reviews yet.

Be the first to review “Eylar 20″ Large Hard Gear Case with RAGAR Foam Inserts, Black”