Description
If you already own a stippling gun or woodburner and just want more texture options, this four-tip set from Oregon Trail Defense is a clean way to expand what you can do. Every tip is machined right here in the USA and threads onto a standard stippling gun or soldering iron, so there's no new tool to learn. These are the same tips found in OTD's full Firearms Stippling Kit, sold on their own for folks who don't need another burner cluttering the bench.
What Each Stippling Tip Brings to the Table
The 20 LPI Waffle tip is the workhorse of the group and handles everything from a light, grippy finish to aggressive texture depending on how you press. The Rectangle tip lays down brick, tree bark, and checkerboard-style patterns when you want something with a little visual character. Rounding things out are two tapered round tips: the Small Round melts smoothly and leaves a roughly 1/16 inch dot pattern, while the Large Round steps that up to about 1/8 inch for bolder coverage. Together they give you plenty of range for dialing in exactly the grip you want.
Getting the Most From Your OTD Stippling Tips
Stippling is one of those skills that rewards patience. Run your burner at a moderate temperature, keep the workspace ventilated, and practice on old A2 grips, magazine floorplates, or scrap polymer before you touch a frame you care about. Different polymers react differently to heat, so a few practice passes tell you how hard to press and how fast the material melts.
Keep in mind the waffle tips are considered wear items by design, so heavy users may want a spare on hand. A brass or copper wire brush keeps built-up polymer off the tips between passes and keeps your patterns crisp. Whether you're texturing a carry gun, a duty pistol, or a stack of PMAGs, this little set covers a lot of ground.
Key Specifications
- Manufacturer: Oregon Trail Defense
- Manufacturer Part Number: ST-TIPKIT
- UPC: 808887499906
- Number of Tips: 4
- Tips Included: 20 LPI Waffle, Rectangle, Small Round, Large Round
- Country of Origin: Made in the USA
- Small Round Pattern: Approx. 1/16 inch dot
- Large Round Pattern: Approx. 1/8 inch dot
- Compatibility: Standard stippling gun or soldering iron / woodburner
- Category: Gunsmithing Tools & Gunsmith Supplies
What’s Included
- OTD 20 LPI Waffle Tip
- OTD Rectangle Tip
- Small Round Tip
- Large Round Tip
Frequently Asked Questions
What tips come in the Stippling Tip Kit?
You get four machined tips: the 20 LPI Waffle, the Rectangle, a Small Round, and a Large Round. The waffle is the most versatile and handles light to heavy texture, the rectangle produces brick and tree bark style patterns, and the two round tips leave dot patterns at roughly 1/16 and 1/8 inch. It covers most of the textures folks want without buying tips individually.
Do I need a special tool to use these stippling tips?
No special tool required. The tips thread onto a standard stippling gun or a common woodburner or soldering iron, so if you already have a burner you're ready to go. Oregon Trail Defense recommends running at a moderate temperature rather than cranking the heat, which gives you more control over the melt.
Will this kit work with the Oregon Trail Defense Stippling Kit I already own?
Yes. These are direct replacements and duplicates of the tips found in the full OTD Firearms Stippling Kit. If your originals wear out or you just want backups on the bench, this set drops right in.
How long do the tips last?
The round and rectangle tips hold up well over time, but the waffle tips are considered wear items because of how they're built. Expect a waffle tip to handle a couple or a few complete polymer pistols before it's worth replacing. Keeping the tips clean with a brass brush between passes helps them last and keeps your patterns sharp.





Reviews
There are no reviews yet.