Description
Anyone who has field stripped a Remington 700 on the kitchen table knows the drill: springs disappear, pins roll off the edge, and solvent leaves a mark you have to explain later. This TekMat solves all of that at once. It gives you 12 by 36 inches of dedicated space to spread out your rifle, your tools, and every small part without stacking things on top of each other.
The surface is a soft thermoplastic fiber that keeps your bluing and stock finish from getting scuffed while you work. Underneath, the 1/8-inch vulcanized rubber backing grips the bench so the mat stays put, and it blocks oil, solvent, and dirt from soaking through to whatever is below. When it gets grimy, toss it in the wash on a gentle cycle and let it air dry. It comes back looking close to new.
The Parts Diagram That Actually Earns Its Spot
The printing is where TekMat separates itself. Rather than silkscreening the design on top, the graphics are dye-sublimated, meaning the ink is heat-transferred into the fibers so it will not scratch off, fade, or wash out over time. The layout includes a full exploded view of the Remington 700 plus a labeled parts list and a bit of the rifle's history, so it doubles as a reference guide when you are reassembling or hunting down the name of a specific component.
Sized Right for the Remington 700 Platform
This mat is printed for the Remington 700 in all its variants, so whether you run a bolt gun in .308, .30-06, 6.5 Creedmoor, or one of the many magnum chamberings built on that action, the diagram applies to your rifle. The 36-inch length is long enough to lay out a fully disassembled bolt-action with room left over for a cleaning rod, brushes, patches, and a bottle of oil. It is a simple piece of gear, but it is one of those things you stop thinking about once you own it because it just makes bench time cleaner and easier.
Key Specifications
- Manufacturer: TekMat
- Manufacturer Part Number: TEK-R36-REM-700
- Model Number: 36REM700
- UPC: 804879222903
- Fits: Remington 700 (all variants)
- Dimensions: 12 in x 36 in
- Thickness: 1/8 inch
- Color: Black
- Top Surface: Soft thermoplastic fiber, oil and water resistant
- Backing: Non-slip vulcanized rubber
- Printing: Dye-sublimation, scratch and fade resistant
- Graphic: Remington 700 exploded parts diagram and parts list
- Care: Machine washable, gentle cycle, air dry
What’s Included
- TekMat Remington 700 12×36 gun cleaning mat
Frequently Asked Questions
Does this TekMat fit all Remington 700 models?
Yes. The mat and its printed parts diagram cover the Remington 700 across its variants, from standard bolt guns to the many caliber configurations built on that action. The diagram references the shared 700 platform, so it applies whether you shoot a .308, .30-06, or a magnum chambering.
How thick is the Remington 700 cleaning mat and will it protect my bench?
It measures 1/8 inch thick with a vulcanized rubber backing. That thickness cushions parts and tools while blocking oil and solvent from reaching your bench or table. The rubber also grips the surface so the mat does not slide around while you work.
Will the printed parts diagram wear off over time?
No. TekMat uses dye-sublimation printing, which heat-transfers the ink directly into the fibers instead of silkscreening it on the surface. That means the diagram resists scratching, fading, and oil, so it stays readable for the long haul.
How do I clean the mat once it gets dirty?
When it picks up too much oil, solvent, or grime, run it through the washing machine on a gentle cycle and let it air dry. It holds up well and comes back looking close to new. The surface itself is oil and water resistant, so most messes wipe up easily between deeper cleanings.





Reviews
There are no reviews yet.