Description
TW25B has been the reference point for firearm grease since 1987, and it earned that spot by working, not by advertising. It's a light synthetic grease built for the high-friction, load-bearing spots on a gun where thin oils tend to sling off or dry up. Rather than just sitting on top of the metal, it penetrates the microscopic pores and fractures every metal surface has and leaves behind a semi-dry film that keeps working long after you'd expect. That's the reason it's rated for a temperature swing from about 90 below zero all the way up to 450 degrees.
Where the TW25B Grease Earns Its Keep
Think slide rails, barrel hoods, locking lugs, bolt carriers, and any metal-on-metal contact point that takes a beating. Folks who run it swear by how it stays put through a few hundred rounds of dirty ammo without gumming up, and because the grease is white you can see exactly where you've applied it. The trick is going light. A few dabs spread thin with a small brush or your fingertip does more than caking it on, and less product means less dirt sticking to your action.
What Sets This Synthetic Grease Apart
This is Mil-Comm's original formula and the one all branches of the U.S. military have tested and fielded, which tells you it holds up under cyclic rates way higher than anything a civilian gun sees. It resists wash-off and wear-off, passes salt fog corrosion testing, and carries load well past 3,000 pounds in lab data. It's also all-synthetic and pairs cleanly with Mil-Comm's MC2500 oil for the pivot points and hard-to-reach spots where a grease won't flow.
Why the 4 oz Tube Makes Sense
The 4 oz size is the sweet spot if you maintain more than one firearm or want to refill smaller syringes and range-bag applicators. The tapered tip gives you precise placement and the screw-on cap keeps grit out between uses. One heads-up worth knowing: the grease can separate over time, so give the capped tube a squeeze and a knead to bring it back together before applying, and plenty of users store their tubes tip-down for that reason.
Key Specifications
- Manufacturer: Mil-Comm Products Company
- Manufacturer Part Number: 25241
- UPC: 796524252413
- Product Type: Light Synthetic Grease
- Size: 4 oz Tube
- Applicator: Tapered tip with screw-on cap
- Temperature Range: -90°F (-67°C) to +450°F (+232°C)
- Formulation: All-synthetic, non-toxic
- Load Carrying Capability (Falex): Over 3,150 lbs
- Salt Fog Corrosion (500 hrs): Pass, no rust
- 4-Ball Wear Scar (D-4172B): .52
- Unworked Penetration (ASTM D-217): 320
- Made In: USA
What’s Included
- One 4 oz tapered tip tube of Mil-Comm TW25B Light Synthetic Grease with screw-on cap
Frequently Asked Questions
Where should I use TW25B grease on my firearm?
It shines on the high-friction, sliding contact points like slide rails, barrel hoods, locking lugs, and bolt carrier groups. Apply a thin coat to clean, dry metal and wipe off any excess so it doesn't grab dirt. For pivot points and pins, most folks pair it with a light gun oil since a grease won't flow into tight crevices.
How long will a 4 oz tube of TW25B last?
A very long time. Because you only need a few dabs spread thin per application, longtime users report a single tube lasting many years across multiple guns. The 4 oz size is popular specifically for maintaining several firearms or topping off smaller syringes and applicators.
Why does the TW25B grease separate in the tube, and is that a problem?
Separation is normal for this formula and not a defect. Just keep the cap on and give the tube a good squeeze and knead to bring the grease back into suspension before you use it. Many owners store their tubes tip-down to help minimize it.
Does TW25B work in extreme cold and heat?
Yes, that's one of its strong suits. It's rated to perform from around -90°F all the way up to +450°F, and it holds up in sand, dirt, high humidity, and saltwater environments. That wide range is a big reason it's been trusted for demanding conditions since 1987.





Reviews
There are no reviews yet.