0
0

Forster 6.5×47 Lapua Bench Rest Seater Die (006015)

UPC: 757253999215

$70.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're chasing one-hole groups with your 6.5×47 Lapua, the seating die matters just as much as the brass and bullets you feed it. Forster built its reputation on this exact design, and the Bench Rest Seater Die is the one that started it all. Instead of supporting just the case neck and bullet like a lot of standard dies, Forster's die uses a caliber-specific chamber that cradles the entire outside diameter of the sized case. That full-length support keeps the case, bullet, and seating stem lined up through the whole stroke, which is what gives you that straight-line seat and seriously low bullet runout.

What the 6.5×47 Lapua Bench Rest Seater Die Does Differently

This is a non-crimping die, so it press-fits the bullet without touching the case mouth. The design traces back to Forster's original patent for the close-fitting chamber system, and it's still regarded as one of the best straight-line seaters you can put on a press. The floating seating stem lets the bullet find its own center in the neck before it gets pushed home, which is a big part of why reloaders keep coming back to these.

Set Up for Modern Bullets

Forster keeps refining the seating stems so they play nice with today's projectiles. The stem on this die has plenty of clearance to seat bullets off the ogive rather than the tip, which matters when you're loading sleek VLD and high-BC match bullets in a 6.5×47. That means you get consistent seating depth measured where it counts, not off a soft or inconsistent meplat.

Fits Standard Presses

The die uses 7/8-14 threading and drops right into most standard single-stage reloading presses. It's a precision tool aimed at the handloader who cares about concentricity, whether you're shooting benchrest, PRS, or just want your 6.5×47 to group as tight as it's capable of. Pair it with a Forster full-length or neck sizing die and you've got a match-grade loading setup.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: 006015
  • UPC: 757253999215
  • Caliber: 6.5x47mm Lapua
  • Die Type: Bench Rest Seater Die
  • Seating Style: Non-crimping, straight-line press-fit
  • Seating Stem: Floating, seats off the bullet ogive
  • Thread: 7/8-14
  • Gun Type: Rifle
  • Quantity: 1 die

What’s Included

  • Forster 6.5×47 Lapua Bench Rest Seater Die (1)

Frequently Asked Questions

Does the 6.5×47 Lapua Bench Rest Seater Die have a micrometer adjustment?

No, this is the standard Bench Rest Seater Die, which adjusts the seating stem by thread. If you want micrometer adjustment with index marks for fine-tuning seating depth, Forster offers the Ultra Micrometer Seater Die for 6.5×47 Lapua as a separate model. Both use the same close-fitting chamber for alignment, so the seating accuracy is the same either way.

Will this seater die work with VLD and high-BC match bullets?

Yes. The seating stem has plenty of clearance so it contacts the bullet on the ogive rather than the tip, which is exactly what you want for VLD and long match-grade projectiles. That gives you more consistent seating depth since you're not referencing off a soft or uneven meplat.

What makes the Forster Bench Rest Seater Die more accurate than a standard seater?

The key is the caliber-specific chamber that supports the entire outside diameter of the sized case, not just the neck and bullet. That full support keeps the case, bullet, and seating stem all lined up through the whole seating stroke. The result is very low bullet runout and concentric rounds load after load.

Does this die fit a standard reloading press?

Yes. It uses standard 7/8-14 threading and installs in most single-stage reloading presses. It's a single seating die, so pair it with a sizing die to complete your 6.5×47 Lapua loading setup.

Additional information

UPC

757253999215

Manufacturer

Manufacturer Part Number

006015

Reviews

There are no reviews yet.

Be the first to review “Forster 6.5×47 Lapua Bench Rest Seater Die (006015)”