0
0

Forster 6.5x47mm Lapua Bench Rest Full Length Sizing Die

UPC: 757253999185

$57.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading 6.5×47 Lapua and want brass that fits your chamber like a glove, this Forster full length die earns its spot on the bench. It works the whole case in one stroke, sizing the neck, shoulder, and body, bumping the shoulder back to set headspace, knocking out the spent primer, and expanding the neck. That makes it a versatile starting point whether you're running a tight bolt gun or a gas gun that needs cases brought all the way back to factory new specs.

What Sets the Forster 6.5×47 Lapua Full Length Die Apart

The heart of this die is Forster's elevated E-Z Out expander ball. Because the expander sits higher in the die, most of the neck is still captured in the sizing section when the ball is drawn through, which keeps the neck and case axis in alignment and helps prevent the neck from pulling off center. You barely feel the effort on the press handle since the expanding happens where your linkage has the most leverage. The result is straighter necks and more consistent neck tension round after round.

Build Quality You Can Feel in the Forster 6.5x47mm Lapua Sizer

Forster machines these from hardened steel with one-piece reamers and hand polishes them before and after heat treating for a smooth internal finish. A precisely placed vent hole lets trapped air and sizing lube escape so it won't dent cases or mar the die. The included Cross Bolt Die Lock Ring clamps around the full ring rather than driving a screw into the die threads, so your headspace setting holds and the threads stay undamaged over time.

Press Setup Notes for the 6.5×47 Lapua Full Length Sizing Die

The body uses the standard 7/8-14 thread, so it drops into any common reloading press. If you're running a Forster Co-Ax press you won't need a shellholder at all. In any other press, just use the shellholder your press maker recommends. Keep in mind the shellholder is sold separately, so grab the right one for 6.5×47 Lapua if you don't already have it.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: 005346
  • UPC: 757253999185
  • Caliber: 6.5x47mm Lapua
  • Die Series: Bench Rest
  • Die Type: Full Length Sizing
  • Gun Type: Rifle
  • Material: Hardened Steel
  • Thread: 7/8-14
  • Expander System: Elevated E-Z Out Expander Ball
  • Lock Ring: Cross Bolt Die Lock Ring
  • Quantity: 1 die
  • Country of Origin: Made in USA

What’s Included

  • One Forster full length sizing die
  • Decapping assembly with decapping pin and floating E-Z Out expander ball
  • Cross Bolt Die Lock Ring
  • Instructions
  • Die box

Frequently Asked Questions

What does the 6.5×47 Lapua full length sizing die do in one pass?

It sizes the case neck, shoulder, and body, bumps the shoulder back to set headspace, deprimes the case, and expands the neck. That brings fired brass back to factory new specifications in a single stroke. It's the most versatile way to work your 6.5×47 Lapua cases, especially if you shoot more than one rifle in that chambering.

Does this Forster die come with a shellholder?

No, the shellholder is sold separately, so you'll want to pick up one sized for 6.5×47 Lapua if you don't have it already. The good news is you don't need a shellholder at all if you're running a Forster Co-Ax press. In any other standard press, just use the shellholder recommended by that press maker.

Will the 6.5x47mm Lapua sizing die fit my press?

Yes, the die body uses the common 7/8-14 thread, so it threads into any standard reloading press. The included Cross Bolt Die Lock Ring clamps around the whole ring instead of biting into the threads, which helps your headspace setting stay put. It also works in Forster Co-Ax presses.

What makes the E-Z Out expander ball worth it?

The expander ball sits elevated in the die, so the neck stays supported in the sizing section while the ball passes through it. That keeps the neck and case in alignment and helps prevent the neck from being pulled off center, which gives you straighter, more concentric brass. It also takes less effort on the press handle since the expanding happens where you have the most leverage.

Additional information

UPC

757253999185

Manufacturer

Manufacturer Part Number

005346

Reviews

There are no reviews yet.

Be the first to review “Forster 6.5x47mm Lapua Bench Rest Full Length Sizing Die”