Description
The Forster Bench Rest Seater Die for 6.5 Grendel is the die that started it all. Forster was first to market with this style of seater, and the core idea has not changed because it simply works: the bullet, the case, and the seating stem all ride inside the same close-fitting chamber through the entire seating stroke. That full-support approach is what keeps your loaded rounds concentric and gives you the straight-line seating that bench rest crowd chases. If you shoot 6.5 Grendel out of an AR or a bolt gun and you've been fighting runout, this is the die that cleans it up.
What Sets the 6.5 Grendel Bench Rest Seater Die Apart
Most in-line seaters only grab the case neck or the case rim. Forster's caliber-specific die chamber supports the entire outside diameter of the sized case instead, so nothing is left to wobble while the bullet gets pressed home. It's a non-crimping design, which is exactly what you want for precision loads where consistency beats a crimp every time. The hand-polished seating stem adds to that smooth, repeatable feel on the press handle.
Bullet Fit and Press Compatibility
The seating stem is cut with plenty of clearance so it contacts the bullet on the ogive rather than the tip. That matters a lot with the long, pointy VLD and ballistic-tip bullets a lot of 6.5 Grendel handloaders run, since seating off the tip can mark up a bullet and throw off your seating depth. The die threads into any standard 7/8-14 reloading press, so it drops right into whatever setup you already have on the bench.
Dialing In Your 6.5 Grendel Loads
This is the standard Bench Rest seater, adjusted with a conventional threaded seating stem rather than a micrometer top. Set your depth, lock it down, and you've got a rock-solid reference for that load. Pair it with a Forster full-length sizing die and you've got a complete 6.5 Grendel reloading setup that delivers the kind of concentricity serious reloaders expect.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: 006017
- UPC: 757253999161
- Caliber: 6.5 Grendel
- Die Type: Bench Rest Seater Die
- Seating Style: Non-crimping straight-line (in-line)
- Adjustment: Standard threaded seating stem
- Thread: 7/8-14 (standard press fit)
- Seating Stem: Hand-polished, seats off the bullet ogive
- Configuration: Rifle
- Quantity: 1 die
What’s Included
- Forster 6.5 Grendel Bench Rest Seater Die (1)
Frequently Asked Questions
Is this the micrometer version of the 6.5 Grendel seater die?
No, this is the standard Forster Bench Rest Seater Die, MPN 006017, which uses a conventional threaded seating stem rather than a micrometer top. It still delivers the same straight-line chamber alignment that Forster is known for. If you want micrometer adjustment for quick, repeatable depth changes, that would be the separate Ultra Micrometer version.
Does the 6.5 Grendel Bench Rest Seater Die crimp the case?
No, it is a non-crimping design. That is by intent, since precision handloads generally shoot more consistently without a crimp. The die focuses on holding the bullet and case in perfect alignment during seating instead.
Will this die work with my regular reloading press?
Yes. The die uses a standard 7/8-14 thread, so it fits most common single-stage and turret presses. If you run a Forster Co-Ax press you won't need a shellholder, but in any other press you'll use the shellholder recommended for 6.5 Grendel.
Can it seat long VLD and ballistic-tip bullets?
It can. The seating stem is machined with extra clearance so it contacts the bullet on the ogive rather than the tip. That keeps longer, pointed bullets from getting marked up and helps your seating depth stay consistent round to round.




Reviews
There are no reviews yet.