0
0

Forster 308 Winchester Bushing Bump Neck Sizing Die (BBD3751)

UPC: 757253998874

$72.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Forster's Bushing Bump Neck Sizing Die for .308 Winchester is built for handloaders who care about consistency and want real control over how their brass is worked. Instead of sizing the whole case like a standard full-length die, this one focuses on the neck and shoulder. It sizes the neck down using whatever bushing you choose and bumps the shoulder back just enough to set headspace for smooth chambering, all while leaving the body of the case with its fire-formed fit to your chamber. The result is brass that stays truer, lasts longer, and feeds your rifle rounds that chamber with no fuss.

What Sets the 308 Bushing Bump Die Apart

The magic here is the bushing system. Forster offers interchangeable neck bushings in .001 inch increments, so you can tune neck tension to match your brass and your load. A good starting point is picking a bushing roughly .002 inch smaller than a loaded round measures at the neck. Because you only size the neck as much as necessary, you avoid overworking the brass, which is one of the biggest reasons necks split and case life gets cut short. The bushings themselves are machined to a smooth interior finish for clean, consistent sizing.

Dialing In Neck Tension With the 308 Win Bump Die

The die also gives you options depending on how your brass is prepped. If you neck turn your cases to a uniform wall thickness, you can pull the expander ball and size from the outside only. If your brass isn't turned, leave the expander ball in and pick a bushing large enough that every case ends up with a consistent inside diameter and even bullet grip. A decapping assembly handles depriming in the same stroke, so you're not adding steps.

This is a precision tool aimed at target shooters, long-range folks, and anyone chasing single-hole groups out of their .308. Keep in mind the neck bushings are sold separately, so you'll want to measure your loaded rounds and order the right size to get started. Made in the U.S.A.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: BBD3751
  • UPC: 757253998874
  • Cartridge: .308 Winchester / 7.62 NATO
  • Type: Bushing Bump Neck Sizing Die
  • Function: Neck sizing, shoulder bump, and depriming
  • Bushing Increments: 0.001 inch (bushings sold separately)
  • Expander Ball: Removable for neck-turned brass
  • Country of Origin: United States

What’s Included

  • One Forster Bushing Bump Neck Sizing Die for .308 Winchester
  • Decapping (depriming) assembly
  • Instructions

Frequently Asked Questions

Does the 308 Bushing Bump Neck Die come with bushings?

No, the neck bushings are sold separately. You'll want to measure a loaded round at the case neck and choose a bushing about .002 inch smaller than that measurement. Forster offers bushings in .001 inch increments so you can fine-tune neck tension exactly how you want it.

What's the difference between this and a standard full-length sizing die?

A standard full-length die resizes the entire case body along with the neck. This bushing bump die only sizes the neck and bumps the shoulder back to set headspace, leaving the body with its fire-formed fit to your chamber. That approach keeps necks straighter, reduces how much you work the brass, and extends case life.

Can I remove the expander ball on the Forster 308 bump die?

Yes. If your brass is neck turned to a uniform wall thickness, you can pull the expander ball and size from the outside only. If your cases aren't turned, leave the ball in and pick a bushing large enough that every case gets a consistent inside diameter and even bullet grip.

Does this die deprime the cases too?

It does. The die includes a decapping assembly, so it sizes the neck, bumps the shoulder, and removes the spent primer in one stroke. That keeps your reloading process efficient without adding a separate depriming step.

Additional information

UPC

757253998874

Manufacturer

Manufacturer Part Number

BBD3751

Reviews

There are no reviews yet.

Be the first to review “Forster 308 Winchester Bushing Bump Neck Sizing Die (BBD3751)”