0
0

Forster .307″ Neck Bushing (BUSH-307) for Bushing Bump & Full Length Dies

UPC: 757253998263

$16.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster .307" neck bushing is a single precision bushing that lets you take full control of your neck tension. Instead of relying on a fixed expander, your bushing choice sets the internal neck diameter, so you can tune bullet grip to match your brass and your load. This .307" size (part number BUSH-307) is one step in Forster's lineup, which runs in .001 inch increments so you can fine-tune to your exact brass wall thickness.

How the Forster .307" Neck Bushing Works in Your Die

These bushings drop into Forster Bushing Bump Neck Sizing Dies and Bushing Full Length Sizing Dies. The bushing sizes the outside of the case neck while the die handles the shoulder bump or body work, keeping necks straight and concentric. One thing worth noting up front: these are made for Forster dies only and are not cross-compatible with Redding or Wilson bushings, so make sure your die is a Forster before you order.

Picking the Right Bushing Size

Forster's rule of thumb is to choose a bushing roughly .002 inch smaller than a loaded round measures at the case neck. Measure the outside neck diameter on several of your loaded rounds, take the smallest reading, and subtract .002 inch to land on your bushing number. If you want a little more bullet grip, subtract .003 inch instead. That means a .307" bushing is a common fit for brass that mics right around .309" at the loaded neck, though your exact needs depend on your neck wall thickness.

Why the Cryogenic Treatment Matters

After heat treating, Forster runs these bushings through a cryogenic process that refines and closes the surface of the steel. The payoff is a slick, hand-finished interior that slides over case necks smoothly and resists wear over a long reloading life. That smooth-as-silk finish is what helps produce straighter, more consistent loaded rounds round after round.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: BUSH-307
  • UPC: 757253998263
  • Diameter: 0.307 in
  • Material: Heat-treated steel
  • Finish: Cryogenically treated, honed interior
  • Sizing Increment Available: 0.001 in
  • Compatibility: Forster Bushing Bump Neck & Full Length Bushing Sizing Dies
  • Quantity: 1 bushing
  • Country of Origin: USA

What’s Included

  • One (1) Forster .307" neck bushing (BUSH-307)

Frequently Asked Questions

What dies does the Forster .307" neck bushing fit?

It's designed for Forster Bushing Bump Neck Sizing Dies and Forster Bushing Full Length Sizing Dies. It is not compatible with Redding or Wilson bushing dies, so this is strictly a Forster-to-Forster component. Check that your die is a Forster before ordering.

How do I know if .307" is the right bushing size for me?

Measure the outside neck diameter of several loaded rounds with a micrometer or dial caliper and use the smallest reading. Subtract .002 inch from that number to get your bushing size, or subtract .003 inch if you want more bullet grip. A .307" bushing commonly suits loaded necks measuring around .309", but your neck wall thickness is the deciding factor.

Does the Forster bushing replace the expander ball?

Yes. Forster's bushing bump dies use a decapping assembly without an expander ball, so your bushing choice is what sets the internal neck diameter. That's the whole point of a bushing setup, it lets you control neck tension directly rather than relying on a fixed expander.

Is this sold as a single bushing or a set?

This listing is for one single .307" bushing (BUSH-307). Forster bushings come in .001 inch increments, so many reloaders keep a few neighboring sizes on hand to fine-tune tension as their brass changes over its life.

Additional information

UPC

757253998263

Manufacturer

Manufacturer Part Number

BUSH-307

Reviews

There are no reviews yet.

Be the first to review “Forster .307″ Neck Bushing (BUSH-307) for Bushing Bump & Full Length Dies”