Description
Setting up a .308 or 7.62×51 build and want a chamber that happily runs surplus NATO ammo and your handloads? This Forster Match Gauge lands at 1.632", which is a length a lot of FAL, M14, and precision bolt builders reach for when they want a happy medium between the tight .308 Winchester GO dimension and the longer 7.62 NATO spec. It gives you a real-world reference point so your finished chamber isn't too tight for milsurp brass or too loose for accurate reloading.
Forster builds these to serious standards. The gauges are machined from tool steel and held to extremely tight tolerances, then inspected before they leave the shop. That kind of precision matters here, since headspace is the distance between the breech face and the base of the seated cartridge, and getting it wrong can hurt both accuracy and safety.
How the 1.632" Match Gauge Fits Your Build
Think of this as a GO-style reference on the longer side. You drop it in a stripped chamber, close the action on it, and check for clean lockup. If the bolt closes on 1.632" but stops short of your NO-GO, you're sitting in a range that tends to cycle mixed 7.62 NATO surplus and .308 handloads without drama. It's a favorite move for guys chambering barrels who plan to feed whatever ammo they can get their hands on.
Getting the Most From the Forster Match Headspace Gauge
Keep it clean and free of oil or grit before checking, since even a thin film can throw off your reading. Pair it with a NO-GO gauge if you want to bracket your headspace from both ends during a barrel install. One thing worth noting: the 7.62 NATO family and .308 Winchester share the same case dimensions before firing, so this gauge is a smart bridge tool for anyone building a rifle meant to run both. It's a small piece of steel that saves you a lot of guesswork and gives you real confidence in how your rifle is put together.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: HG308-1.6320-SP
- UPC: 757253992308
- Caliber: .308 Winchester / 7.62×51 NATO
- Gauge Type: Match Gauge
- Length: 1.632"
- Material: Tool Steel
- Color: Steel
- Quantity: 1
What’s Included
- One .308 / 7.62 NATO 1.632" Match headspace gauge
Frequently Asked Questions
What is the 1.632" Match gauge used for?
It gives you a chamber reference length that sits between the tighter .308 Winchester GO and the longer 7.62 NATO GO dimensions. Builders use it to set up a chamber that reliably runs both military surplus 7.62 ammo and their own .308 reloads. You close the action on it during a barrel install or chamber check to confirm proper lockup.
Will this Match headspace gauge work for both .308 Winchester and 7.62 NATO rifles?
Yes, this is one of the main reasons people choose the 1.632" length. Since 7.62 NATO and .308 Winchester brass share the same dimensions before firing, this gauge acts as a bridge for rifles meant to feed either. It's a popular pick for FAL, M14, and mixed-use bolt builds.
How do I use this gauge to check headspace?
Make sure the chamber and gauge are clean and free of oil, then insert the gauge and gently close the action on it. Never force the bolt. Pairing it with a NO-GO gauge lets you bracket your headspace from both ends when installing a barrel.
Is this a set or a single gauge?
This listing is for a single 1.632" Match gauge, not a full set. If you want to bracket your headspace during a barrel install, you'll want to add a NO-GO gauge alongside it. Many builders keep a GO or Match gauge and a NO-GO on hand for complete chamber checks.




Reviews
There are no reviews yet.