Description
Headspace is one of those things you can't eyeball, and getting it wrong is not the kind of mistake you want to find out about the hard way. This Forster Match Gauge gives you a hard, precisely ground steel reference at the 1.635" dimension for the .308 Winchester and 7.62 NATO family, so you know exactly where your chamber sits before you trust it with ammo. Forster has been building these tools since 1935, and their reputation for accuracy is well earned among gunsmiths and home builders alike.
Where the 1.635" Match Gauge Fits In
Forster's standard .308 GO gauge runs about 1.630" and the NO-GO sits near 1.634", while the 7.62 NATO minimum is roughly 1.6355". This 1.635" match dimension lands right in that window, making it a useful checkpoint when you want a tighter, more deliberate read than a wide-open field gauge. If your action locks up on this gauge, you have a clear picture of how much room is in the chamber. Match gauges are ground to closer tolerances than general-purpose gauges, which is why serious builders reach for them when accuracy and repeatability matter.
Built From Hardened Steel That Holds Its Numbers
These gauges are machined from tool steel and held to tolerances measured in ten-thousandths of an inch. That kind of precision means the gauge you get today reads the same as it did the day it left the shop, and it won't wander on you after repeated use. It's a simple, drop-in tool: clear the chamber, insert the gauge, and gently close the action to feel where you stand.
Using the Match Gauge on Your Build
Whether you're setting up a fresh barrel on a bolt gun, checking a semi-auto build, or inspecting a surplus rifle you just brought home, this gauge does the quiet, important work of confirming the chamber is where it should be. Keep in mind the 7.62 NATO spec runs a touch different from commercial .308 Winchester, so match your gauge choice to the ammo and rifle you're working with. For anyone who takes their chamber work seriously, a proper Forster gauge belongs in the toolbox.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: HG308-1.6350-SP
- UPC: 757253992285
- Caliber: .308 Winchester / 7.62 NATO
- Gauge Length: 1.635"
- Style: Match Gauge
- Material: Hardened steel
- Color: Steel
- Type: Rimless chamber headspace gauge
- Quantity: 1
What’s Included
- One (1) Forster .308 / 7.62 NATO 1.635" match headspace gauge
Frequently Asked Questions
What does the 1.635" dimension on this match gauge tell me?
The 1.635" figure is the ground reference length of the gauge, measured to the chamber's datum point. When you drop it in and close the action, the gauge tells you whether your chamber is at or beyond that length. Forster's standard GO for .308 runs near 1.630" and NO-GO near 1.634", so this match gauge gives you a precise checkpoint just above those.
Is this the same as a GO or NO-GO gauge?
It's a match-grade gauge held to tighter tolerances than general-purpose GO/NO-GO gauges, and its 1.635" length places it right around the tighter end of the range. Think of it as a precision reference for builders who want a more deliberate read rather than a wide-open field check. Match your gauge choice to the exact chamber and ammo you're working with.
Can I use a .308 gauge to check a 7.62 NATO chamber?
The two cartridges share the same case dimensions, but 7.62 NATO chambers are often cut with slightly more headspace than commercial .308 Winchester chambers. This gauge covers both families, though you'll want to know your rifle's intended spec and the ammo you plan to run. When in doubt, verify against the dimension your barrel or build was chambered to.
Do I need to remove the extractor and ejector to use it?
Forster's traditional rimless gauges are designed to give the most accurate read with the extractor and ejector out of the way, since those parts can push against the gauge and mask the true measurement. Many builders remove them for the cleanest possible reading. On a bolt gun that's usually straightforward, so plan a few minutes for setup.



Reviews
There are no reviews yet.