Description
If you're loading for the fast-and-flat 28 Nosler and want brass that chambers like it was made for your rifle, this Forster full length sizing die earns its spot on the bench. It sizes the case neck and body, bumps the shoulder back to set headspace, deprimes, and expands the neck in one stroke. The whole thing is machined by hand from quality steel and held to tight tolerances, then hand polished before and after heat treating so the interior finish is smooth enough to work your brass without chewing it up.
What Sets the Forster 28 Nosler Sizing Die Apart
The real story here is Forster's exclusive E-Z Out expander ball. It sits higher up in the neck area than most other dies, so the case neck is still captured and centered in the die when the expander passes through it. That support keeps the neck and case body aligned and cuts down on runout, which is the kind of consistency that shows up on paper at distance. Reloaders who chase low neck runout tend to put these dies at the top of the list, and plenty of folks even swap Forster expander assemblies into other brands to get the same effect.
Running the 28 Nosler Full Length Die
This is a true full length die, so it works your fired cases back to minimum spec and lets them re-chamber with minimal play in any standard-spec 28 Nosler rifle. That makes it a smart pick for hunters who need reliable feeding and for anyone running a repeater who wants every round to drop in clean. It comes with the decapping and expander assembly already installed, and the Forster Cross Bolt lock ring clamps the split ring rather than biting a set screw into the die threads, so your setting stays put.
Fits Your Press
The die is standard 7/8-14 thread, so it threads into conventional single-stage and turret presses, and the lock ring design is right at home in a Forster Co-Ax. Pair it with the correct shellholder for your press, or skip the shellholder entirely if you're running a Co-Ax.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: 005525
- UPC: 757253991721
- Cartridge: 28 Nosler
- Die Style: Full Length Sizing Die
- Expander System: E-Z Out elevated floating expander ball
- Lock Ring: Forster Cross Bolt Die Locking Ring
- Thread: 7/8-14
- Construction: Hand-machined steel, hand polished, heat treated
- Functions: Sizes neck and body, bumps shoulder, deprimes, expands neck
- Made In: USA
What’s Included
- One Forster 28 Nosler full length sizing die
- Decapping assembly with decapping pin and floating expander ball (installed)
- Forster Cross Bolt die locking ring
- Instructions
- Die box
Frequently Asked Questions
Does the 28 Nosler full length sizing die come with a decapping pin and expander?
Yes. The die ships with the decapping and expander assembly already installed, so it will deprime and expand the neck right out of the box. The expander is Forster's elevated E-Z Out ball design for better neck concentricity.
Will this Forster die fit my press?
It uses standard 7/8-14 threads, so it works in conventional single-stage and turret presses. The Forster Cross Bolt lock ring is also designed to work great in a Forster Co-Ax press.
Do I need a shellholder with the 28 Nosler sizing die?
If you're using a traditional threaded press, yes, you'll need the correct shellholder for the 28 Nosler case head. If you're running a Forster Co-Ax press, no shellholder is required since the press uses sliding jaws.
Is this a neck sizing die or a full length die?
This is a full length sizing die. It sizes the case neck and body, bumps the shoulder back to set headspace, and returns fired brass to minimum spec so it re-chambers with minimal play in a standard 28 Nosler chamber.



Reviews
There are no reviews yet.