0
0

Forster Bench Rest 300 PRC Full Length Sizing Die (005549)

UPC: 757253991233

$57.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster Bench Rest Full Length Sizing Die for 300 PRC is where a lot of handloaders start their die collection, and for good reason. In one pass it works the case neck, shoulder, and body, bumps the shoulder back to set your headspace, deprimes the old primer, and expands the neck to spec. That full-length approach gives you the flexibility to size brass fired from any rifle and bring it back to SAAMI minimum chamber dimensions, so your ammo chambers clean and consistent every time.

What Sets This 300 PRC Sizer Apart

Forster machines these dies by hand using one-piece reamers, which is a big part of why they hold such tight concentricity. The standout feature is the elevated E-Z Out expander ball system. Because the expander sits higher in the die, it does its work while the case neck is still supported, which reduces the pull on your shoulder and keeps runout down. Reloaders who switch to these from other brands tend to notice how smoothly the ram cycles, almost buttery compared to what they were running before.

Building Better 300 PRC Brass

The 300 PRC runs stout, and brass worked hard at those pressures benefits from a die that sizes it correctly without overworking the neck. A precisely positioned vent hole keeps trapped air and excess lube from denting your shoulders or damaging the die, which is a nice touch when you're processing a pile of cases. This is the standard full length sizer, not the bushing version, so the neck tension is set by the die and expander rather than interchangeable bushings.

A Die That Grows With Your Bench

Forster offers full length sizers in more than 70 calibers, and they're sold individually or paired with a Bench Rest seater in a die set. If you're already running a Co-Ax press or any standard 7/8-14 setup, this 300 PRC sizer drops right in. It's a straightforward, well-built tool that earns its keep on the bench year after year.

Key Specifications

  • Manufacturer: Forster Products
  • Caliber: .300 PRC
  • Die Type: Full Length Sizing Die
  • Die Series: Bench Rest
  • Expander System: Elevated E-Z Out expander ball
  • Machining: Hand-machined with one-piece reamers
  • Thread: 7/8-14 standard
  • Material: Steel
  • Color: Gray
  • Quantity in Set: 1
  • Manufacturer Part Number: 005549
  • UPC: 757253991233

What’s Included

  • Forster Bench Rest Full Length Sizing Die for .300 PRC (1)

Frequently Asked Questions

What does the Forster 300 PRC Full Length Sizing Die actually do to the case?

It sizes the case neck, shoulder, and body in a single stroke while depriming the spent primer. It also bumps the shoulder back to set your headspace and expands the neck as the case comes out. That full-length work brings fired brass back down to SAAMI minimum chamber dimensions for reliable chambering.

Is this the bushing version of the Forster 300 PRC sizer?

No, this is the standard Bench Rest full length sizing die, not the bushing model. Neck tension is set by the die's internal dimension and the E-Z Out expander ball rather than interchangeable bushings. If you want to fine-tune neck tension with bushings, Forster makes a separate bushing die for the 300 PRC.

What is the E-Z Out expander ball and why does it matter?

It's an expander ball positioned higher up in the die than a typical design. Because it does its work while the neck is still supported by the die, it reduces drag and the pull on the case shoulder. The result is lower runout and a smoother feel on the press handle.

Will this die fit my reloading press?

Yes, it uses the standard 7/8-14 threading found on common single-stage and turret presses, so it threads right in. It's also a natural fit for the Forster Co-Ax press. You'll want the correct shell holder for the 300 PRC case head to run it.

Additional information

UPC

757253991233

Manufacturer

Manufacturer Part Number

5549

Reviews

There are no reviews yet.

Be the first to review “Forster Bench Rest 300 PRC Full Length Sizing Die (005549)”