0
0

Forster 22 GT Ultra Micrometer Seater Die | U00015

UPC: 757253990885

$118.99

Out of stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster 22 GT Ultra Micrometer Seater Die is built for handloaders who care about every thousandth of an inch. If you're loading for the 22 GT, you already know this cartridge rewards attention to detail, and this die gives you the tools to deliver it. The micrometer head on top lets you fine-tune seating depth in either direction, with clearly marked index lines at .001 inch increments and the ability to nudge it down to .0005 when you're chasing that perfect jump to the lands.

What really sets this die apart is the floating chamber sleeve. It captures the case completely before the bullet ever starts moving, holding both the bullet and the case in perfect alignment during the press-fit seating stroke. That translates to low runout and straight, concentric rounds, which is exactly what you want out of a precision cartridge like the 22 GT that so often ends up in PRS and benchrest rifles.

Why the 22 GT Ultra Micrometer Seater Die Earns Its Keep

Once you've found your node and measured your loaded length, dialing the micrometer back to that exact setting is simple. No more guessing, no more running a round out and checking it five times. The sharp white graduations are easy to read and easy to record in your load notes, so you can come back to a proven depth weeks later and pick up right where you left off. Worth noting, this is a non-crimping seater, which is standard for Forster's bench rest line and ideal for precision loads where you don't want to disturb the bullet.

Built the Way Forster Builds Everything

The die body is polished steel machined to tight tolerances, and the micrometer top is hard-coat anodized aluminum so the markings stay crisp. It's made in the USA and backed by Forster's reputation among precision reloaders. If you run a Forster Co-Ax press, you won't need a shellholder, and it drops right into any standard 7/8-14 threaded press as well.

Key Specifications

  • Manufacturer: Forster Products
  • Cartridge: 22 GT
  • Die Style: Ultra Micrometer Bullet Seating Die
  • Adjustment Increment: .001 inch marked, adjustable to .0005 inch
  • Crimping: Non-crimping seater
  • Die Body Material: Polished steel
  • Micrometer Head Material: Hard-coat anodized aluminum
  • Thread: 7/8-14 standard
  • Country of Origin: Made in the USA
  • Manufacturer Part Number: U00015
  • UPC: 757253990885

What’s Included

  • One Forster Ultra Micrometer Seater Die
  • Split-type lock ring
  • Storage case
  • Instructions

Frequently Asked Questions

How fine can I adjust seating depth with the 22 GT Ultra Micrometer Seater Die?

The micrometer head is marked in clear .001 inch increments and can be adjusted down to .0005 inch in either direction. That level of control lets you precisely manage your bullet's jump to the lands. After seating a round and measuring it, you just dial the stem to your target length and the next rounds come out right where you want them.

Does this die crimp the case?

No, this is a non-crimping seater, which is standard across Forster's bench rest Ultra Micrometer line. That's by design for precision loads where you want to seat the bullet without disturbing it. If you need a crimp, you'd add a separate crimping step with a dedicated die.

What makes the floating chamber sleeve matter on the 22 GT seater die?

The spring-loaded sliding sleeve fully captures the case before the bullet begins seating, holding both in alignment through the entire stroke. This is what keeps runout low and produces straight, concentric ammo. For a precision cartridge like the 22 GT, that alignment is a big part of getting consistent groups downrange.

Will this die work in my press?

Yes, it uses the standard 7/8-14 thread so it fits common single-stage and turret presses. If you're running a Forster Co-Ax press, you won't even need a shellholder since the press handles that differently. It's a straightforward setup either way.

Additional information

UPC

757253990885

Manufacturer

Manufacturer Part Number

U00015

Reviews

There are no reviews yet.

Be the first to review “Forster 22 GT Ultra Micrometer Seater Die | U00015”