Description
The Forster 277 Fury Full Length Sizing Die handles the heavy lifting of case prep for the 277 SIG Fury. In one stroke it sizes the case neck and body, bumps the shoulder back to set headspace, deprimes the spent primer, and expands the neck to grip your next bullet. Forster machines these dies with one-piece reamers, which is a big part of why their rounds come out so concentric and why so many precision reloaders keep coming back to them.
What Sets the 277 Fury Full Length Sizing Die Apart
The star of the show is Forster's E-Z Out Floating Expander Ball. It sits elevated on the decapping rod, so the case neck is still captured in the sizing portion of the die while the ball passes through. That extra support keeps the neck and case axis in line and cuts down on runout, which translates to straighter ammo and better consistency downrange. The expander ball runs 0.001 inch under bullet diameter, so with a touch of brass springback you end up with roughly 0.002 inch of bullet grip.
Fitting the 277 Fury Sizing Die to Your Press
The die comes with Forster's Die Body Ring, so it drops right into a Forster Co-Ax press or any standard 7/8-14 threaded press. Knurled knobs make adjusting the decapping assembly quick and tool-free, and the decapping pin is hardened to hold up over thousands of cases. If you're running a traditional press you'll want the correct shellholder for the 277 SIG Fury, which is sold separately. Co-Ax users won't need one.
Built from quality steel and machined to tight tolerances right here in the USA, this die will take fired 277 Fury brass back to minimum spec and keep doing it reload after reload. It's a smart foundation for anyone loading this cartridge who wants factory-level or better concentricity off the bench.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: 5412
- UPC: 757253990816
- Cartridge: 277 SIG Fury
- Die Style: Full Length Sizing Die
- Material: Carbon Steel
- Thread: 7/8-14 (includes Forster Die Body Ring)
- Expander System: E-Z Out Floating Expander Ball
- Quantity: 1 die
- Country of Origin: USA
What’s Included
- One Forster 277 Fury Full Length Sizing Die
- Decapping assembly with decapping pin and floating expander ball
- Forster Die Body Ring
- Die box
- Complete instructions
Frequently Asked Questions
What does the 277 Fury full length sizing die do in one pass?
It sizes the case neck and body, bumps the shoulder back to establish headspace, deprimes the spent primer, and expands the case neck. That means it takes your fired 277 SIG Fury brass back to minimum SAAMI spec and preps it to accept the next bullet. It handles the full resizing job so your brass is ready for priming and charging.
Will this Forster die work in a standard reloading press?
Yes. The die ships with Forster's Die Body Ring, so it threads into any standard 7/8-14 press as well as Forster's own Co-Ax press. If you're using a traditional threaded press, you'll also need the correct shellholder for the 277 SIG Fury, which is sold separately.
What is the E-Z Out expander ball and why does it matter?
It's Forster's elevated, floating expander ball that sits high on the decapping rod. Because the neck stays supported in the sizing portion of the die while the ball passes through, it keeps the neck centered and reduces runout. The result is straighter, more concentric ammo and less effort pulling the ball back through the neck.
How much neck tension does this die provide?
The expander ball measures about 0.001 inch under bullet diameter. Accounting for typical brass springback of around 0.001 inch, that works out to roughly 0.002 inch of bullet grip. That's a solid, consistent hold for reliable seating and good accuracy.





Reviews
There are no reviews yet.