Description
The Forster bushing full length sizing die gives you control that standard dies simply can't match. Instead of forcing every case to fit one rigid internal diameter, you're adjusting neck tension in precise increments by swapping interchangeable bushings. This means less stress on your brass with each firing cycle, and cases that'll survive more reloads before work hardening takes them out of service.
How Bushing Sizing Differs
When you use a standard die, it sizes the neck down, then an expander ball comes back through to set the final diameter. That two-step process works, but it can work your brass harder than needed. A bushing die skips that expander step. The bushing simply applies the right amount of squeeze to grip your bullet securely without overdoing it. The better the match between your brass and your bushing size, the less stress on the neck overall.
Sizing the Body and Shoulder Right
While you're controlling neck tension, the die handles the case body and shoulder the way a full length die should. It bumps the shoulder back just enough to fit your chamber safely while maintaining the case's fire-formed fit to your rifle. This balanced approach keeps your ammo feeding reliably while protecting the brass.
Included Features
The die comes with an etched reference line on the body and a Forster Accu-Ring that lets you dial in shoulder bump in 0.001" increments. That means you can set it exactly the same way every time you load. Bushings are ordered separately, which gives you flexibility to experiment with different neck tensions or swap sizes as your brass wears and work-hardens over multiple firings.
Key Specifications
- Cartridge: 308 Winchester
- Die Type: Full Length Bushing Sizing Die
- Manufacturer: Forster Products
- Model Number: FBD4751
- UPC: 757253990601
- Features: Etched reference line, Accu-Ring with 0.001" increments, interchangeable bushing system
- Bushing Increments: 0.001 inch
- Bushing Compatibility: Forster bushings only
- Thread Size: 7/8-14
- Bushings Included: None (ordered separately)
What’s Included
- Forster bushing full length sizing die
- Accu-Ring with reference marks
- Etched reference line on die body
Frequently Asked Questions
Do I get bushings with this die?
This die is sold without bushings. You'll order them separately, which actually gives you flexibility to start with one or two sizes and add more as you experiment with neck tension. For 308 Winchester, most reloaders need bushings in the .331 to .337 range depending on their brass and rifle setup.
How does a bushing die reduce case working compared to standard dies?
A standard die sizes the neck down, then an expander ball comes back through. A bushing die skips that step entirely. The bushing applies a smooth, consistent squeeze without the push-pull action. Less mechanical working means less hardening, and brass that lasts longer.
What's the Accu-Ring for?
The Accu-Ring is a precision lock ring with reference marks spaced at 0.001 inch increments. It lets you adjust shoulder bump to exact specifications and dial back to the same setting every time you reload. Combined with the etched line on the die body, you get repeatable setup that's critical for precision loads.
Can I use this die in any reloading press?
The die has standard 7/8-14 threads and will fit any press designed for standard reloading dies. However, the Accu-Ring's reference marks are calibrated for use with Forster presses. You can use it in other presses, but the micrometer adjustments won't be as precise.


Reviews
There are no reviews yet.