Description
Loading for the 375 Enabelr means you're working with one of the big boys in the long-range world, and that kind of cartridge deserves a die that can keep up. This is Forster's XL Full Length Sizing Die built specifically for the 375 Enabelr case, carrying part number 006000. It sizes the neck, shoulder, and body in one stroke, bumps the shoulder to set headspace, deprimes the case, and expands the neck so your brass drops back into a SAAMI minimum chamber with minimal play.
What Sets the 375 Enabelr Sizing Die Apart
Forster machines each die from quality steel to very tight tolerances, then hand polishes it both before and after heat treating for an extra fine finish inside. That attention is what gives these dies their reputation for producing concentric rounds time after time, which matters a lot when you're stretching a 375 out to serious distance. The one-piece construction and careful reaming are a big part of why so many precision loaders lean on Forster for consistency.
The E-Z Out Expander on the Forster Full Length Die
The standout feature here is the elevated E-Z Out expander button. It sits higher in the neck area than most other dies, which keeps the case neck centered and concentric as the expander passes through. The result is less neck runout and more uniform bullet tension, both of which translate directly to better accuracy on paper. A quick tip from the reloading crowd: if you feel heavy resistance on the sizing stroke, back the expander down slightly so the case mouth is held and centered before the ball enters. Set it right and the stroke is smooth with almost no runout.
Locking It Down
Every Forster die ships with their Cross Bolt Die Locking Ring, which clamps around the full ring and tightens the two split ends together rather than driving a set screw straight into the die threads. That means reliable, repeatable alignment with no canting and no chewed-up threads, so your settings stay put once you've dialed them in. It fits standard 7/8 inch by 14 presses, so this die drops right into whatever setup you're already running.
Key Specifications
- Manufacturer: Forster Products
- Cartridge: 375 Enabelr
- Die Style: Full Length Sizing Die
- Die Line: XL (Extra Large)
- Material: Hand-polished, heat-treated steel
- Expander: E-Z Out expander button
- Locking Ring: Forster Cross Bolt Die Locking Ring
- Thread: 7/8 inch – 14
- Manufacturer Part Number: 006000
- UPC: 757253990137
What’s Included
- Forster 375 Enabelr Full Length Sizing Die
- E-Z Out expander/decapping assembly
- Forster Cross Bolt Die Locking Ring
- User instructions
Frequently Asked Questions
What does the Forster 375 Enabelr Full Length Sizing Die do?
It sizes the case neck, shoulder, and body in a single stroke while bumping the shoulder to set headspace. It also deprimes the case and expands the neck using the E-Z Out expander. The goal is brass that re-chambers cleanly in a SAAMI minimum chamber with consistent neck tension.
Will this die fit a standard reloading press?
Yes. The Forster Cross Bolt Locking Ring and die body use the standard 7/8 inch by 14 thread, so it threads into common single-stage and turret presses. Keep in mind the 375 Enabelr is a large case, so make sure your press has the stroke and shell holder capacity for it.
What makes the E-Z Out expander worth paying attention to?
The expander button sits higher in the neck than most dies, which keeps the case mouth centered as the ball passes through. That reduces neck runout and gives you more uniform bullet tension. For a smooth stroke, set the expander so the case mouth is held and centered before the ball enters the neck.
Does this come as a single die or a full set?
This listing is the Full Length Sizing Die on its own, part number 006000. If you want a matching seater, Forster offers die sets that pair this sizer with their Ultra Micrometer Seater for the 375 Enabelr. Buying the sizer alone is a solid choice if you already have a seater you like.




Reviews
There are no reviews yet.