0
0

Forster 375 Enabler Full Length Die Set – Ultra Micrometer Seater

UPC: 757253990052

$362.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Loading the 375 Enabler is a different animal than your standard rifle cartridge, and this Forster set is built specifically for that oversized case. It includes the Ultra Micrometer Seater die and a Full Length Sizing die, both machined in Lanark, Illinois with the kind of attention to concentricity that makes Forster a go-to name for precision handloaders. These are XL-format dies that use 1-1/4 inch threads rather than the standard 7/8-14, so they're meant to run in a press sized for the job like the Forster Co-Ax XL.

What the 375 Enabler Full Length Die Set Brings to the Bench

The Full Length Sizing die reworks the neck, shoulder, and body in one pass while depriming, bringing fired brass back down to a minimum SAAMI-spec dimension so it chambers clean. It carries Forster's E-Z Out expander button, which sits higher up in the neck than most designs. That placement supports the case and keeps the neck axis in line as the case is pulled back out of the die, which goes a long way toward keeping your necks concentric and your brass lasting longer.

Dialing In Seating Depth with the Ultra Micrometer Seater

The seater is where this set really earns its keep. It's a non-crimping, bench rest style design with a sliding chamber that holds the bullet and case in alignment as the bullet is press-fit seated. The micrometer top lets you adjust seating depth in fine increments, and once you've recorded a setting you can dial right back to it when you swap bullets or loads. For anyone chasing the lands or working up loads across different projectiles, that repeatability saves a lot of guesswork.

Who Should Reach for the 375 Enabler Die Set

This is a tool for the long-range and big-bore crowd feeding a 375 Enabler rifle. If you're already set up with an XL press and you want match-grade sizing and seating without fighting your gear, this Forster set is about as dialed as it gets for the caliber. Made in the USA and packaged ready to go to work.

Key Specifications

  • Manufacturer: Forster Products
  • Cartridge: 375 Enabler
  • Die Style: Full Length Die Set
  • Set Type: 2-Die Set (Ultra Micrometer Seater + Full Length Sizer)
  • Material: Steel
  • Thread Size: 1-1/4 inch (XL)
  • Seater Adjustment: Ultra Micrometer, fine seating depth increments
  • Expander: E-Z Out expander button
  • Seater Style: Non-crimping bench rest
  • Country of Origin: Made in USA
  • Manufacturer Part Number: U97500
  • UPC: 757253990052

What’s Included

  • Forster Ultra Micrometer Seater die (375 Enabler)
  • Forster Full Length Sizing die (375 Enabler)
  • Deluxe die box

Frequently Asked Questions

What press do I need to run the 375 Enabler Full Length Die Set?

These are XL-format dies with 1-1/4 inch threads, which is larger than the standard 7/8-14 reloading die. They're built to run in a press threaded to match, such as the Forster Co-Ax XL. A standard single-stage press sized for typical rifle dies won't accept them.

What dies come in the Forster 375 Enabler set?

The set includes two dies: the Ultra Micrometer Seater die and a Full Length Sizing die. The sizer handles the neck, shoulder, body, and depriming in one stroke, while the micrometer seater gives you repeatable, fine-tuned bullet seating depth.

Does the Ultra Micrometer Seater crimp the bullet?

No, this is a non-crimping bench rest style seater. It uses a sliding chamber that holds the bullet and case in alignment as the bullet is press-fit seated, which favors accuracy and consistency. If you need a crimp, you'd add a separate crimp die.

What does the E-Z Out expander button do on the sizing die?

The E-Z Out expander sits higher in the neck area than many other designs. That placement keeps the case and neck axis aligned as the case is withdrawn from the die, which helps keep your necks concentric and extends case life.

Additional information

UPC

757253990052

Manufacturer

Manufacturer Part Number

U97500

Reviews

There are no reviews yet.

Be the first to review “Forster 375 Enabler Full Length Die Set – Ultra Micrometer Seater”