Description
Loading the .50 BMG is a different animal than running a bolt rifle or AR cartridge, and your dies need to be built for the job. This Forster Full Length Die Set covers both of the big steps, taking fired brass back to spec and setting your bullets with repeatable precision. It brings together a Full Length Sizing Die and the Ultra Micrometer Seater in one package, machined to the tight tolerances that have earned Forster a strong following among precision handloaders.
What the Forster 50 BMG Full Length Die Set Does at the Bench
The Full Length Sizing Die works the whole case, sizing the neck, shoulder, and body while depriming and expanding the case neck in one pass. That returns your brass to a SAAMI minimum dimension so it chambers cleanly round after round, which is exactly what you want when you are reloading expensive fifty brass many times over. These dies ship with the expander and decapping pin already installed, and they are machined by hand with one-piece reamers for consistency.
Why the E-Z Out Expander and Ultra Seater Matter
Forster's E-Z Out expander ball sits higher up in the neck than most designs. That elevated position supports the case neck and keeps the axis of the neck and case in alignment as the case is drawn back out of the die, which helps you hold concentricity instead of fighting runout. The Ultra Micrometer Seater is where the fine tuning happens. The micrometer top lets you adjust seating depth in small, repeatable increments, so dialing in your bullet to the lands is straightforward, and switching between bullets is as easy as returning to a recorded setting.
Fitting the Forster 50 BMG Dies to Your Press
These are large 1-1/4" dies, so you will need a press set up to run that size, such as the Forster Co-Ax XL. The payoff for the bigger hardware is ammunition that fits your chamber like a glove and holds the kind of consistency that long-range fifty work demands.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number (MPN): U98000
- UPC: 757253990021
- Cartridge: .50 BMG
- Die Style: Full Length Die Set (2 Die)
- Die Size: 1-1/4" x 12
- Seater Type: Ultra Micrometer Seater
- Sizing Die Type: Full Length Sizing Die
- Expander System: E-Z Out Elevated Expander Ball
- Material: High-quality steel, machined to exacting tolerances
- Press Compatibility: Requires a press capable of 1-1/4" dies (e.g. Forster Co-Ax XL)
What’s Included
- Forster 50 BMG Full Length Sizing Die (with expander and decapping pin installed)
- Forster 50 BMG Ultra Micrometer Seater Die
Frequently Asked Questions
What comes in the Forster 50 BMG Full Length Die Set?
The set includes two dies, a Full Length Sizing Die and the Ultra Micrometer Seater Die. The sizing die arrives with the expander and decapping pin already installed, so you can get to work quickly. Together they handle both resizing your fired brass and seating your bullets.
What press do I need to run these 50 BMG dies?
These are large 1-1/4" dies, so you need a press built to accept that size rather than a standard 7/8" setup. The Forster Co-Ax XL is designed for exactly this, and it accepts 1-1/4" dies right out of the box. Keep in mind that many 50 BMG dies are built around thicker shell holders, so a little height adjustment may be needed depending on your press.
What does the Ultra Micrometer Seater add over a standard seater?
The micrometer top lets you set and record bullet seating depth in small, repeatable increments. That makes fine tuning your bullet to the rifling simple and takes the guesswork out of switching between different bullets. For precision long-range fifty loads, that repeatability is a big help.
How does the E-Z Out expander help with concentricity?
Forster positions the expander ball higher in the neck than most dies. As the case is drawn out of the die, that elevated ball supports the neck and keeps the neck and case axis in alignment. The result is more concentric case necks and less runout in your finished rounds.





Reviews
There are no reviews yet.