Description
The 284 Shehane is a blown-out, Ackley-style take on the 284 Winchester, and it rewards reloaders who care about brass fit and seating consistency. This Forster Bench Rest Die Set is a great match for that mindset. It's a two-die set that brings together a Full Length Sizing Die and a Bench Rest Seater Die, both machined from quality steel and hand polished before and after heat treating for a smooth, slick finish that works brass gently.
What the 284 Shehane Full Length Die Set Brings to the Bench
Forster's reputation is built on concentricity, and these dies earn it. The full length sizer uses the E-Z Out expander ball, which sits higher up in the neck than most designs. That elevated position keeps the neck and case axis in line as the case is pulled back out, which cuts down on runout and keeps your necks straight. For a wildcat like the Shehane where you're fire-forming and fine-tuning brass to your own chamber, that kind of alignment control matters.
Seating Straight with the Bench Rest Seater
The Bench Rest Seater Die is where this set really shines. It uses a caliber-specific sliding die chamber that holds the bullet, case, and seating stem in perfect alignment while the bullet is pressed home. It's a non-crimping design, so you get clean, co-axial seating with no marks on the bullet nose and very low runout, which is exactly what you want chasing tight groups at distance.
Built to Last and Easy to Dial In
Both dies wear Forster's Cross Bolt Die Lock Ring, which clamps around the whole die instead of digging a set screw into the threads. That means no thread damage, no canting, and settings that hold where you put them. Everything is standard 7/8-14 thread, so it drops into most presses, and if you run a Forster Co-Ax you won't even need a shellholder. It's proudly made in the USA and comes packaged in Forster's Deluxe Die Box, ready for the reloading bench.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: 004430
- UPC: 757253989995
- Cartridge: 284 Shehane
- Die Style: Bench Rest Die Set
- Dies Included: 2 (Full Length Sizer + Bench Rest Seater)
- Material: Hand-Polished Steel
- Thread: 7/8-14
- Lock Ring: Cross Bolt Die Lock Ring
- Expander: E-Z Out Expander Ball
- Seater Type: Non-Crimping Bench Rest Seater
- Country of Origin: Made in USA
What’s Included
- Full Length Sizing Die with E-Z Out expander and decapping unit
- Bench Rest Seater Die
- Cross Bolt Die Lock Rings
- Forster Deluxe Die Box
Frequently Asked Questions
What comes in the Forster 284 Shehane Full Length Die Set?
This is a two-die Bench Rest set that includes a Full Length Sizing Die and a Bench Rest Seater Die. Both arrive with Forster's Cross Bolt Die Lock Rings and are packaged together in the Deluxe Die Box. A shellholder is not included.
Does this 284 Shehane die set have a micrometer seater?
No, this set uses Forster's standard Bench Rest Seater Die rather than the Ultra Micrometer version. It still uses the caliber-specific sliding die chamber for straight-line, non-crimping bullet seating. If you want micrometer adjustment, that is offered as a separate set or as an upgrade stem.
Will these dies work in my press?
Yes, the dies use standard 7/8-14 threads, so they fit most common reloading presses. If you run a Forster Co-Ax press, you won't need a shellholder at all. For any non-Forster press, use the manufacturer-recommended shellholder for the 284 Shehane case head.
What makes the Forster full length sizer good for a wildcat like the 284 Shehane?
The full length sizer uses the E-Z Out expander ball positioned high in the neck, which keeps the case and neck in alignment as the case is withdrawn. That reduces runout and helps you size brass to your own chamber consistently. For a blown-out cartridge where fit and concentricity are everything, that alignment control pays off on the target.




Reviews
There are no reviews yet.