Description
If you shoot 6.5×47 Lapua and care about tight groups, this Forster die set covers both halves of the job in one box. The bushing full length sizing die resizes the body and bumps the shoulder while letting you control neck tension through interchangeable bushings, and the Ultra micrometer seater handles bullet seating with the kind of repeatability that benchrest and precision loaders look for. It's a step up from a standard two-die set, built for people who measure runout and chase consistency load after load.
What the 6.5×47 Lapua Bushing Full Length Die Does
The sizing die works the body, shoulder, and neck in a single stroke. Instead of pulling your necks through a fixed button, it uses a bushing that lets you set the exact amount of neck tension you want. Sizing the shoulder and body just enough to chamber smoothly while limiting how much the neck gets worked means straighter necks, longer brass life, and more uniform bullet grip. The set includes three bushings sized .287, .289, and .291, so you've got room to tune tension to your brass and bullet combo right out of the gate.
Why the Ultra Micrometer Seater Earns Its Keep
The Ultra seater is where this set really separates itself. A floating chamber sleeve captures the case and holds the bullet, case, and seating stem in alignment through the entire stroke, which keeps runout down and concentricity up. The micrometer head adjusts seating depth in .001 inch increments and can be fine-tuned to around .0005, with bright white markings that make it easy to record a setting and come right back to it. It's a non-crimping design, and the seating stem contacts the bullet on the ogive rather than the tip, so VLD and other long-nose match bullets seat cleanly.
Made in the USA, this is a set that rewards careful handloading. For a precision cartridge like the 6.5×47 Lapua, having both a tunable sizer and a true micrometer seater in matching dies takes a lot of guesswork out of building accurate ammo.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: UFB4411
- UPC: 757253989827
- Cartridge: 6.5x47mm Lapua
- Die Style: Bushing Full Length Die Set with Ultra Micrometer Seater
- Bushings Included: 3 (.287, .289, .291)
- Seater Type: Ultra Micrometer, non-crimping
- Micrometer Adjustment: .001 inch gradations, fine-tunable to .0005 inch
- Country of Origin: Made in USA
- Shipping Weight: 1.515 lbs
What’s Included
- Bushing Full Length Sizing Die
- Ultra Micrometer Seater Die
- Three neck bushings (.287, .289, .291)
- Split-type lock rings
- Storage case
- Instructions
Frequently Asked Questions
What dies come in the Forster 6.5×47 Lapua Ultra die set?
This set includes two dies: a bushing full length sizing die and an Ultra micrometer bullet seating die. The sizer resizes the body, bumps the shoulder, and sizes the neck using interchangeable bushings, while the seater handles precise bullet seating. You also get three bushings so you can start tuning neck tension right away.
Which bushings are included and do I need to buy more?
The set ships with three bushings in .287, .289, and .291. That range covers most common brass and bullet combinations for the 6.5×47 Lapua, letting you adjust neck tension in small steps. If your particular brass or neck-turning setup calls for a different size, Forster bushings are sold individually to fill in the gaps.
Does the Ultra micrometer seater crimp the case?
No, the Ultra seater is a non-crimping design. It uses a floating chamber sleeve to hold the bullet and case in alignment through the entire seating stroke, which helps keep runout low. The micrometer head lets you set and repeat seating depth in .001 inch increments, with room to fine-tune to about .0005.
Is this die set a good fit for precision and benchrest loading?
Yes, it's built for exactly that kind of work. The bushing sizer gives you control over neck tension and helps extend brass life by limiting how much the neck gets worked, and the micrometer seater delivers repeatable seating depth with strong concentricity. For a precision cartridge like the 6.5×47 Lapua, that combination is a solid foundation for consistent, accurate ammo.




Reviews
There are no reviews yet.