Description
Forster has been making some of the straightest-seating dies in the reloading world for decades, and this 338 Lapua Magnum set is a great example of why handloaders keep coming back to them. It pairs the Forster Full Length Sizer Die with the Bench Rest Seater Die, giving you everything needed to size fired brass and seat bullets with the kind of consistency that shows up on paper. Each die is machined from quality steel, held to close tolerances, and hand-polished before and after heat treating for a smooth, snag-free feel on every stroke.
What the Forster 338 Lapua Die Set Brings to the Bench
The Full Length Sizer works the neck, shoulder, and body of the case so your brass drops back into a minimum SAAMI chamber without fuss. Forster's E-Z Out floating expander ball sits high in the die, so the neck passes over it while most of the case is still captured and supported. That setup keeps necks from getting pulled off center, which is one of the quiet little things that keeps runout low and case life long.
Why the Bench Rest Seater Earns Its Reputation
The seater is where Forster really made its name. The bullet, case, and seating stem are all held together inside one close-fitting chamber through the entire stroke, so everything stays in alignment before the bullet ever starts into the neck. It is a non-crimping design, which is exactly what you want for precision 338 Lapua loads where straightness matters more than a hard crimp.
Setup Notes for Your Press
Both dies ride on the Forster die body ring and work in a Forster Co-Ax press or any standard 7/8-14 threaded press. If you are running a Co-Ax you will not need a shellholder, but in a conventional press you will want the correct shellholder for 338 Lapua, since that is sold separately. The set ships in a Forster deluxe die box with two lock rings, so it stores clean and stays organized on the bench.
Key Specifications
- Cartridge: .338 Lapua Magnum
- Set Type: Full Length Sizer & Bench Rest Seater (2-Die)
- Seater Style: Non-crimping straight-line Bench Rest seater
- Sizer Feature: E-Z Out floating expander ball
- Thread: 7/8-14 (works in Forster Co-Ax or standard presses)
- Lock Rings: 2 included (Cross Bolt style)
- Material: Hand-polished, heat-treated steel
- Manufacturer: Forster Products
- Manufacturer Part Number: 004571
- UPC: 757253701016
- Country of Origin: United States
What’s Included
- Forster Bench Rest Full Length Sizer Die
- Forster Bench Rest Seater Die
- 2 lock rings
- Deluxe die storage box
- Instructions
Frequently Asked Questions
Does the 338 Lapua Magnum die set come with a shellholder?
No, the shellholder is sold separately with this set. If you are running the dies in a Forster Co-Ax press you will not need one at all, since that press holds the case without a shellholder. In any standard threaded press, just pick up the correct shellholder sized for 338 Lapua Magnum.
Will these Forster dies work in a standard reloading press?
Yes. The dies use the Forster die body ring and standard 7/8-14 threading, so they thread right into any conventional press as well as the Forster Co-Ax. It is a flexible setup that fits most benches without any special adapters.
Does the Bench Rest Seater Die crimp the case?
No, it is a non-crimping seater by design. The bullet, case, and seating stem are all held in one close-fitting chamber through the whole stroke, which keeps everything aligned and produces very straight, concentric rounds. For precision 338 Lapua loads that straightness is usually what you are after instead of a crimp.
Is this a full length sizing set or a neck sizing set?
This set uses a full length sizer, which works the neck, shoulder, and body so fired brass returns to minimum SAAMI dimensions. Full length sizing is the right call for keeping your loaded rounds chambering reliably. The paired Bench Rest Seater then handles bullet seating with Forster's signature alignment.




Reviews
There are no reviews yet.