Description
Forster built this full length sizing die for the 300 Remington Ultra Mag handloader who cares about consistency. In a single stroke it sizes the case neck, shoulder, and body, bumps the shoulder back to set headspace, deprimes the case, and expands the neck. That means your once-fired brass comes out of the press ready to chamber smoothly and feed reliably, which is exactly what you want when you're running a big belted-case cartridge like the 300 RUM that works brass hard.
What Sets the Forster 300 RUM Full Length Die Apart
The standout feature here is the elevated E-Z Out floating expander ball. Instead of yanking the neck off-center on the way out, the expander sits high in the die so the neck is still supported by the sizing area as it passes over the ball. The result is better alignment and tighter concentricity, which translates to straighter necks and more uniform bullet tension. Forster machines each die by hand with solid one-piece reamers, then hand-polishes them before and after heat treating for a fine interior finish that resizes smoothly with good case lube.
Fitting the 300 Remington Ultra Mag Sizing Die to Your Press
The die body uses the standard 7/8"-14 thread, so it drops into any common single-stage or turret press without adapters. It ships with a Forster Cross Bolt lock ring that clamps the split ring shut rather than driving a set screw into the die threads, so your setting stays put and the finish stays undamaged. If you run a Forster Co-Ax press, the lock ring is designed to index with it perfectly, and you won't need a shellholder.
Forster only makes one grade of die, and it's their top tier. Reloaders who've swapped over from entry-level dies regularly point to cases that chamber effortlessly and measurable improvements in group size. For the 300 RUM reloader chasing long-range accuracy, this is the kind of sizing die that earns a permanent spot on the bench.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: 005551
- UPC: 757253021008
- Cartridge: .300 Remington Ultra Magnum
- Die Type: Full Length Sizing Die
- Series: Bench Rest
- Thread: 7/8"-14
- Material: Steel
- Color: Gray
- Expander System: Elevated E-Z Out Floating Expander Ball
- Quantity: 1 Die
What’s Included
- One Forster 300 Remington Ultra Mag Full Length Sizing Die
- Decapping assembly with decapping pin and E-Z Out floating expander ball
- Forster Cross Bolt lock ring
Frequently Asked Questions
What does the Forster 300 RUM full length sizing die do in one pass?
It sizes the case neck, shoulder, and body while bumping the shoulder back to set proper headspace. At the same time it deprimes the case and expands the neck on the way out. That gives you brass returned to reliable chamber-ready dimensions ready for the next load.
Will this die fit my reloading press?
Yes. It uses the industry-standard 7/8"-14 thread, so it threads into any common single-stage, turret, or progressive press. If you run a Forster Co-Ax press, you won't even need a shellholder.
What is the E-Z Out expander ball and why does it matter?
It's a floating expander ball mounted higher up in the neck area than most dies. Because the neck is still supported by the sizing portion of the die as it passes over the ball, the case and neck stay in alignment. The payoff is straighter necks, better concentricity, and more consistent bullet tension.
Does the 300 Remington Ultra Mag die come with a lock ring?
Yes, it ships with Forster's Cross Bolt lock ring. It clamps the split ring closed rather than digging a set screw into the die threads, so your adjustment holds and the die finish stays clean.




Reviews
There are no reviews yet.