Description
The Forster #45 Drill Bushing is a precision-ground replacement guide made to drop straight into the Forster Universal Sight Mounting Fixture. If you already run the fixture, this is the bushing that keeps your drill bit tracking true when you're prepping a barrel or receiver for scope mounts, receiver sights, or a shotgun bead. It's a small part that does a big job, and having the right size on hand is the difference between a clean hole and a ruined afternoon.
What the #45 Drill Bushing Does in the Fixture
The whole idea behind the Forster fixture is repeatable accuracy, and the bushings are where that happens. The bit rides through a hardened, ground bore that eliminates runout, so the hole ends up exactly where the over-arm places it rather than wandering off center. This #45 is the drill-size bushing that pairs with 3-56 hole work, one of the most common thread sizes for factory scope mount screws. Because the bore is hardened, it holds its dimension through repeated use instead of opening up over time.
Why Gunsmiths Keep Extra Bushings Around
The fixture ships with 6-48 bushings, but real-world work calls for a range of drill and tap sizes depending on what you're mounting and what threads the base uses. Keeping the #45 in your kit means you're ready for 3-56 jobs without stopping to order parts mid-project. Working gunsmiths have leaned on this Forster system for decades precisely because the interchangeable bushings let one fixture cover nearly any single-barrel long gun, from bolt actions to lever guns to pumps.
Built to Forster Standards
Forster has been turning out gunsmithing tools since 1935, and the bushings carry the same made-in-USA machining quality as the rest of the system. This one is manufactured from hardened tool steel and precision ground so it seats cleanly in the over-arm and stays in true alignment with the center of the barrel. It's a straightforward, durable piece that earns its spot in the box every time you set up a mounting job.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: UF1000-023
- UPC: 757253006890
- Bushing Type: #45 Drill
- Material: Hardened tool steel, precision ground
- Pairs With: 3-56 drill and tap work
- Compatibility: Forster Universal Sight Mounting Fixture (UF1000)
- Function: Guides drill bit to eliminate runout
- Country of Origin: USA
What’s Included
- One Forster #45 drill bushing (UF1000-023)
Frequently Asked Questions
What is the Forster #45 drill bushing used for?
It's a guide bushing that drops into the Forster Universal Sight Mounting Fixture to keep your drill bit dead-center while drilling holes for scope mounts, sights, or a shotgun bead. The hardened bore eliminates drill runout so the hole lands exactly where the over-arm sets it. The #45 is the drill size that pairs with 3-56 hole and thread work.
Does this bushing work without the Forster fixture?
No. The #45 bushing is designed to fit the Forster Universal Sight Mounting Fixture and relies on the fixture's over-arm and V-blocks to align it with the barrel. On its own it's just the guide, so you'll need the fixture to put it to work.
Is the #45 a drill bushing or a tap bushing?
This one is the drill bushing. In Forster's system the drill and tap steps use separate correctly sized bushings, and swapping to the proper tap bushing helps prevent the tap from cocking, which is a common cause of broken taps and sloppy holes.
Is the Forster #45 drill bushing hardened?
Yes. It's made from hardened tool steel and precision ground so the bore holds its size through repeated drilling. That hardness is what keeps your holes accurate over the long haul instead of the bushing wearing oversize.




Reviews
There are no reviews yet.