Description
The Forster Ultra Micrometer Seater Die for 30-06 Springfield is built for handloaders chasing tight, consistent groups out of their aught-six. It takes everything that made the original Forster Bench Rest Seater Die popular and adds an ultra-accurate micrometer head on top, so you can stop guessing at seating depth and start recording exact numbers you can return to load after load. The heart of the design is a spring-loaded sliding chamber sleeve that fully captures the case before the bullet ever gets pressed in, keeping bullet and case in true alignment through the whole seating stroke. That's the kind of straight-line seating that keeps runout to a minimum and helps every round chamber and shoot the same.
Why the Ultra Micrometer Head Makes a Difference
The micrometer adjusts seating depth in either direction and is easily set to .0005", with clearly marked gradations at .001" increments. Seat a bullet close to your target length, measure it, then dial the micrometer stem exactly where you want it. The round comes out to the length you need without the back-and-forth trial and error that eats up bench time. Bright white markings on the head are easy to read and easy to write down.
Tuning Your 30-06 Loads to the Lands
If you're working bullets out toward the rifling lands to find your rifle's sweet spot, this die makes that chase a lot less frustrating. Shooting different bullet weights or brands through the same 30-06? Note the optimal micrometer setting for each one and you can jump between loads in seconds. This is a non-crimping seater, so it focuses purely on precise, square bullet placement rather than putting a crimp on the case mouth.
Trusted by Serious Reloaders
Forster has a long-standing reputation among precision reloaders, and this die earns its keep with real-world repeatability. Reloaders consistently point to the excellent concentricity and the snug, well-machined fit between the die, the case, and the seating stem. If you run a Forster Co-Ax press, you won't even need a shellholder with it.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number (MPN): U00113
- UPC: 757253006654
- Cartridge: 30-06 Springfield
- Die Style: Bullet Seating Die
- Die Series: Bench Rest Ultra Micrometer
- Seating Style: Non-crimping
- Micrometer Adjustment: Adjustable to .0005"
- Gradation Markings: .001" increments, bright white
- Alignment Feature: Spring-loaded sliding chamber sleeve
What’s Included
- One Forster Bench Rest Ultra Micrometer Seater Die
- One Forster split-type lock ring
- Storage case
- Complete instructions
Frequently Asked Questions
What does the micrometer on the Forster Ultra Seater Die actually do?
The micrometer head lets you set and repeat exact bullet seating depths without trial and error. It adjusts in either direction and is easily set to .0005", with marked gradations at .001" increments. Once you find your ideal seating depth, you can record the setting and return to it any time.
Does this Forster seater die crimp the case?
No, this is a non-crimping seater die. It's designed to hold the bullet and case in perfect alignment and press-fit the bullet to a precise depth, not to crimp the case mouth. If you want a crimp, you'd apply it with a separate crimp die.
How does the die keep bullets aligned with the case?
It uses a spring-loaded sliding chamber sleeve that fully captures the case before the bullet is seated. This holds the bullet and case in straight-line alignment through the seating stroke, which keeps runout low and helps produce more concentric, consistent ammo.
Do I need a shellholder to use this die?
That depends on your press. With a standard single-stage press you'll use your usual shellholder for the 30-06 case head. If you run a Forster Co-Ax press, a shellholder isn't required since the Co-Ax uses its own jaw system.




Reviews
There are no reviews yet.