Description
The 6.5×55 Swede is a cartridge that rewards careful handloading, and this Forster Ultra Micrometer Seater Die is built to give you that kind of control. It holds the bullet, case, and seating stem together inside a close-fitting chamber for the entire seating stroke, which is the real trick behind straight, concentric ammo. A spring-loaded sliding chamber sleeve captures the sized case before the bullet ever starts moving, so everything stays lined up right through the press-fit.
What the Micrometer Head Brings to Your 6.5×55 Loads
The difference between this Ultra model and a standard bench rest seater is the micrometer up top. It lets you fine-tune seating depth in either direction in .001 inch increments, with the ability to dial in to about .0005 inch. The gradations are marked in bright white so they are easy to read and record. Once you find a depth your rifle likes, you write down the number and dial right back to it next session. That takes most of the trial and error out of chasing the lands, and it is a genuine time saver when you load more than one bullet in the same caliber.
Build and Fit of the 6.5×55 Swede Seater Die
Forster machines these dies from quality steel to tight tolerances and hand polishes them before and after heat treating. This is a non-crimping seater, so it focuses purely on clean, concentric seating rather than roll crimping. Reloaders consistently report low runout with these dies, often measuring under .002 inch, and the Forster split lock ring clamps around the die body instead of digging a set screw into the threads. The seating stem has enough clearance to work with a wide range of bullet shapes, seating off the ogive rather than the tip. If you run heavy VLD style bullets, a dedicated VLD seating stem is available should you want an even better match to those long noses.
This die fits most standard reloading presses and pairs naturally with a Forster full length sizing die to round out a 6.5×55 setup.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: U00064
- UPC: 757253006500
- Caliber: 6.5×55 Swedish Mauser / 6.5×55 SKAN
- Die Type: Bullet Seating Die
- Style: Non-Crimping
- Micrometer Adjustment: Adjustable to .0005 inch
- Graduations: Marked at .001 inch increments
- Lock Ring: Forster Split Type Cross Bolt Lock Ring
- Number of Dies: 1
- Press Compatibility: Fits most standard reloading presses
- Country of Origin: Made in the U.S.A.
What’s Included
- One Forster Bench Rest Ultra Micrometer Seater Die
- One Forster split type lock ring
- Storage case
- Complete instructions
Frequently Asked Questions
What is the difference between this Ultra Micrometer Seater Die and a standard Forster bench rest seater?
Both share the same straight-line, sliding chamber seating design that keeps the bullet and case in alignment. The Ultra adds a numbered micrometer head on top so you can dial seating depth to a recorded number instead of loosening a lock nut and adjusting by feel. That makes it much faster to return to a known depth or switch between bullets while loading the 6.5×55 Swede.
Does the 6.5×55 Swede Ultra Micrometer Seater Die crimp the case?
No, this is a non-crimping seater die. It focuses entirely on seating the bullet straight and to a consistent depth for better concentricity. If you want a crimp, you would add a separate crimp die to your process.
How fine can I adjust the seating depth?
The micrometer head lets you make adjustments in .001 inch increments with the ability to fine-tune down to about .0005 inch. The markings are in bright white so they are easy to read and write down. Once you find a depth your rifle shoots well, you can dial right back to that number the next time you load.
Will this die work with long VLD style bullets in my 6.5×55?
The standard seating stem has generous clearance and seats off the ogive, so it handles a wide range of bullet profiles. For very long VLD bullets, some reloaders prefer a dedicated VLD seating stem for an even closer match to those extended noses. A VLD stem is available separately if you load a lot of those bullets.




Reviews
There are no reviews yet.