0
0

Forster Power Case Trimmer for Drill Press PT1010

UPC: 757253005343

$108.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're tired of hand-cranking brass one case at a time, the Forster Power Case Trimmer PT1010 is the upgrade that pays for itself in saved hours. It mounts to most standard drill presses and lets you trim rifle and pistol cases in seconds while holding the kind of consistency Forster is known for. Reloaders who run big batches, fire-form brass, or convert cases like trimming .44 Magnum down to .44 Special length tend to love how quick this makes the whole job.

How the Power Case Trimmer Handles Length

Trim length is set by the stop on your drill press spindle, so once you dial it in, every case comes out the same. A built-in line-up bar makes it easy to align the trimmer with the spindle for clean, square cuts. The cutter shaft is hardened steel with a 1/4 inch shank and four staggered cutting edges, which is what gives you that smooth, chatter-free finish and bright, uniform case mouths instead of ragged ends.

Parts That Work With Your Existing Forster Gear

This trimmer uses the same Brown and Sharpe type collets found on the Forster Original and Classic hand trimmers, and both collets and pilots interchange between them. If you already own Forster trimming gear, your pilots will drop right in and save you from buying duplicates. The standard cutter handles roughly .204 through .459 caliber case mouths, and Forster offers a separate .17/.20 caliber cutter shaft if you load the little stuff.

Setting Up the PT1010 Right

A few things to know going in: collets and pilots are sold separately, so plan on grabbing the ones that match your calibers. Results are only as good as your drill press, so a chuck with minimal runout and a solid spindle stop will reward you with dead-on trim lengths. Dial it in once and you'll be flying through brass that would take forever with a hand tool.

Key Specifications

  • Manufacturer: Forster Products
  • Model: Power Case Trimmer
  • Manufacturer Part Number: PT1010
  • UPC: 757253005343
  • Type: Power Case Trimmer (drill press mounted)
  • Cutter Shaft: Hardened steel, 1/4 inch shank, four staggered cutting edges
  • Cutter Diameter: 0.490 in
  • Caliber Range: Approx. .204 to .459 case mouths
  • Collet Type: Brown and Sharpe type (interchangeable with Forster Original/Classic)
  • Trim Length Control: Drill press spindle stop
  • Base Material: Cast aluminum with steel collet housing
  • Country of Origin: United States

What’s Included

  • Forster Power Case Trimmer base
  • One steel 1/4 inch cutter shaft
  • Alignment (line-up) bar
  • Mounting hardware

Frequently Asked Questions

Do collets and pilots come with the Forster Power Case Trimmer?

No, collets and pilots are sold separately, so you'll want to pick the ones that match the calibers you load. The good news is this trimmer uses the same Brown and Sharpe type collets as the Forster Original and Classic hand trimmers. If you already own Forster trimming gear, those pilots will interchange right over.

Will the Power Case Trimmer work with my drill press?

It fits most standard drill presses and uses the cutter shaft's 1/4 inch shank to chuck up. Trim length is set by your drill press spindle stop, so a press with a solid, repeatable stop and a chuck with minimal runout gives the most consistent results.

What calibers can the Forster Power Case Trimmer handle?

The standard cutter shaft trims roughly .204 through .459 caliber case mouths, covering most common rifle and pistol brass. For the smaller stuff, Forster offers a separate .17/.20 caliber cutter shaft that you can order on its own.

How does it keep trim lengths consistent?

Case length is controlled by the stop on your drill press spindle, so once you set it, every case trims to the same length. The built-in line-up bar helps you align the trimmer with the spindle, and the four staggered cutting edges produce square, chatter-free case mouths.

Additional information

UPC

757253005343

Manufacturer

Manufacturer Part Number

PT1010

Reviews

There are no reviews yet.

Be the first to review “Forster Power Case Trimmer for Drill Press PT1010”